Manuals
Instructions EMS vest
Congratulations on choosing the eaglefit EMS Vest. This high-quality electrical muscle stimulation training device was developed with extensive expertise so that you can do a highly efficient EMS workout at home and on the go with minimal effort.
About these instructions
EMS devices have been used in physiotherapy and competitive sports for many years. With this device, you can do targeted training at home or on the go, in a hotel or office, while observing the safety instructions and warnings.
To get the greatest possible benefit and, above all, to avoid dangers and risks, you should read these instructions carefully and follow the described rules of conduct.
We hope you enjoy using the eaglefit EMS Vest.
Safety information
Intended use
The eaglefit EMS Vest is a training system based on highly efficient electrical muscle stimulation (EMS) and designed for private use. By combining the Box and the eaglefit EMS System App, you can do an EMS workout anytime at home, in the office, or on the go. This user manual will guide you step by step through the workout and how to use the system, and provide valuable tips and advice for your EMS workout.
The eaglefit EMS Vest is exclusively a training and fitness device, not a medical product.
Safety information
People with heart problems or other cardiovascular conditions, electrical implants, metabolic disorders (e.g., type I or II diabetes, thyroid, liver, or kidney conditions), cancer, an abdominal wall or inguinal hernia, who are pregnant or undergoing chemotherapy must NOT do this workout! We recommend EMS training only for people aged 18 and over.
Here you can find our safety data sheet for the product: to the safety data sheet
Improper use
Read the operating instructions and all information and notices carefully to prevent personal injury and property damage and to avoid dangerous situations. If you fail to follow the instructions and information on proper use, eaglefit GmbH accepts no liability for any resulting personal injury or property damage. In such cases, the warranty will also be void.
Please check your eaglefit EMS Vest for damage before use and contact the manufacturer or your dealer immediately if you notice anything unusual.
Training with the eaglefit EMS Vest must only be carried out in a dry environment. Avoid environments with very high humidity where your customers could come into contact with water (e.g. in the rain, near bathtubs, etc.).
Risks and contraindications
Although no cardiac arrhythmias have ever occurred during training with an eaglefit EMS Vest, legislation requires us to warn of the residual risk. If you have a cardiac arrhythmia, training with the eaglefit EMS Vest is not recommended, as it could otherwise be life-threatening.
Absolute contraindications
- Acute illnesses, bacterial infections or inflammatory processes
- Recent surgery (< 2 months)
- Atherosclerosis, arterial circulatory disorders
- Stents or bypasses that have been in place for less than 6 months
- Untreated high blood pressure
- Diabetes mellitus
- Pregnancy
- Electrical implants, e.g. pacemakers
- Tumors or cancer
- Bleeding disorders, tendency to bleed (hemophilia)
- Neural disorders, epilepsy or multiple sclerosis
- Abdominal wall or inguinal hernias
- Cardiac arrhythmias
Relative contraindications
- Acute back pain without a diagnosis
- Acute neuralgia, herniated discs
- Implant (prosthesis)
- Diseases of the internal organs (especially the kidneys)
- Cardiovascular diseases
- Motion sickness
- Large fluid accumulations in the body, edema
- Open skin injuries, wounds, eczema, burns
- Varicosis, varicose veins
- Acute effects of alcohol, drugs or intoxicating substances
- Taking vaccines
If an absolute or multiple relative contraindications are present, the eaglefit HOME EMS system must not be used. Training despite existing contraindications can lead to anything from minor injuries to death. We expressly point out that training must not be performed if any of the contraindications listed is present.
If in doubt, speak to your doctor before use to find out whether EMS training is suitable for you.
Electrical hazards
If you find any damage to one of the components, you must not use the eaglefit EMS Vest. Handle it with particular care to avoid damaging the material or cables. This means:
- Never use the eaglefit EMS Vest in wet surroundings
- Do not clamp or kink the cables, and do not place heavy objects on them
- Remove all piercings and similar items from the training area before exercising
Any damage must be reported to the manufacturer, who will then decide what action to take.
Training with the eaglefit EMS Vest does not require specific medical and/or physiological knowledge. However, please note that before your first training session with the eaglefit EMS Vest, you must carefully read and understand the operating instructions. Failure to follow the information provided in these operating instructions can lead to dangerous situations and, in extreme cases, death. Use by persons under the age of 18 is prohibited. In the event of non-compliance, the manufacturer accepts no liability for any resulting damage.
Meaning and mode of operation
Training using electrical muscle stimulation (electromyostimulation), also known as EMS training, is based on specifically targeting the striated muscles with electrical impulses. This simulates natural muscle activation. This activation causes the muscle fibers to contract without receiving a signal from the central nervous system (CNS). Normally, the commands for a contraction come from the brain. During physical exertion, these electrical impulses are sent to the muscles by nerves. Because the impulses used in EMS training are so similar to those from the CNS, the muscle cannot distinguish their origin, and a contraction occurs, i.e., the command to contract the muscle comes via the electrodes integrated into the eaglefit EMS Vest. During EMS training, rhythmic stimuli or impulses act on the muscles being trained, causing them to tense and relax in a targeted way. In physical therapy, electrical stimuli are usually used to train only individual muscles or muscle groups, without also performing movements or fitness exercises.
While no movements are performed alongside electrical muscle stimulation, full-body EMS training involves targeted exercises. This also trains your coordination and allows you to apply your increased strength in targeted movements. In addition, whole-body training strengthens the agonists, antagonists and stabilizing muscles, which are difficult to target and influence with conventional training. This helps prevent muscular imbalances, which can occur when training individual large muscle groups unevenly.
Simultaneous muscle activation can also help avoid or correct protective postures, preventing improper strain. The option to add extra exercises during EMS training can improve intra- and intermuscular coordination, as well as motor skills. Another positive effect of the additional exercises is that the tendons, ligaments and joints adapt to the muscle strength gained. Since muscle contractions do not require heavy weights, this form of full-body training is very easy on the joints.
Another advantage is the time saved compared to conventional forms of training:
- Just 20-60 minutes per week is enough
Possible positive effects of EMS training
- Reduction in waist and abdominal circumference
- Reduction in body fat
- Increased endurance and performance
- Back problems may be reduced
- Improved endurance when putting strain on the back in everyday situations
- 15-20 minutes of EMS training burns approx. 400-500 kcal at an appropriate intensity and when performing the exercises correctly
- Increase in maximum performance (movement speed + strength)
Possible specific effects of EMS training
EMS and exercise
- Unlike static muscle activity, dynamic muscle work improves blood flow and lymph circulation
- Physical activity improves the tensile strength of tendons and the supply of nutrients to joint cartilage
- Tendons, ligaments and joint cartilage are strengthened, and bone mineral content and size increase
- Eccentric strength training in particular affects connective tissue (tendons and ligaments)
- Tendon and ligament damage can be repaired more quickly through targeted activity
- These changes make the body more resilient and protect it from injuries
EMS and functional training
- Full-body training (muscles, tendons, ligaments)
- The focus is on learning and performing the movement
- Based on stabilizing the body and, above all, the core muscles
- Can be used with various training equipment (e.g. Sling trainer, balance pad, kettlebell, exercise ball)
EMS and Sling Training
- Full-body exercises and isolation exercises for individual muscles
- The training intensity can be easily varied by changing the angle to the Sling trainer anchor point
- Training the stabilizing muscles with unstable grip ropes, further intensified by a pulley
- Wide variety of exercises thanks to the pulley
- Requires little space
- Easy setup and takedown
EMS and outdoor training
- The focus is on training and movement outdoors
- Full-body exercises
- Exercise intensity is varied using your own body weight, terrain or everyday objects
- Additional mental benefits from outdoor training
- Motivation through variety
EMS training offers the opportunity to work out with great effectiveness and time efficiency. It is therefore an excellent way to increase strength, build muscle and reduce fat. It can generate stimulus intensities higher than those achieved with conventional training methods.
For these reasons, several important conditions must be observed during training.
Training preparation
- EMS training can only be carried out when you are in an appropriate physical condition
- Make sure to replenish your carbohydrate stores before training, as the very large muscle mass being engaged results in a high metabolic load
- You should also make sure to increase your fluid intake before, during and after training
Training progress
- During your first training sessions, you should never overexert yourself. Train for a shorter time (approx. 12-15 min.) and at an appropriate intensity. Gradually increase the training time to 20 min.
- For the first 8-10 weeks, leave at least 4 days between training sessions. This is the only way to ensure recovery and positive adaptation
Quick start guide
Quick start guide for your new eaglefit EMS Vest
- Charge the box, until the LED lights up green
- eaglefit EMS System App in the App Store download
- Put on the Vest – if your skin is extremely dry or you have a lot of body hair, dampen the electrodes slightly or use electrode spray
- Switch on the box (gently press for 2 sec. with your index finger in the small recess between the logo and the LED), attach it to the Suit, and start the app
- Assign a new profile name for the next workout
- Establish a Bluetooth connection to the box (tap “Bluetooth” at the top right, then “Search,” then “Connect”)
- Under “Parameters,” adjust the settings for the profile, warm up sufficiently, then press “Start”
- Increase the intensity of the muscles one by one (press the up arrow until the setting is strong enough, then tap the number above the muscle so it is outlined in gray)
- Start your workout, then end it after 20 minutes
- Save settings by exiting the app using the arrow at the top left
- Make sure to drink enough water before, during, and after your workout, at least 1/2 liter more than usual
- Take a break of at least 48 hours (during the first 10 weeks, no more than 1 workout per week)
Feel free to watch our detailed onboarding video too: EMS Onboarding
Usage tips
How to switch the box on/off correctly:
- To switch it on, press for 2 seconds gently with your index finger in the recess between the logo and the LED
- To switch it off, press for 6 seconds gently with your index finger in the recess between the logo and the LED
We deliberately set the time required to switch off the box to 6 seconds so that you don't accidentally touch the box during your workout and switch it off unintentionally.

First use of the box and app
Charging the box
Before you can start training, please download and install the eaglefit EMS System App from your app store by searching for “eaglefit” or “eaglefit EMS System”.
Before first use, you must charge the box battery for at least 3 hours. Our batteries have overcharge protection, so you cannot “overcharge” them. Use the included USB cable and the 220 V power adapter to charge the battery. While charging, the box indicator lights blue. When the battery is fully charged, the indicator lights green.
Download the eaglefit EMS System App from your app store:
First Launch
When starting the app, you can first choose between the different boxes (BELT, HOME, PRO or CONNECT). Then select the appropriate product.
When using the app for the first time, create a profile for your training. You can save all your settings under “Select profile” later.


If you have already created profiles, they will be displayed. Select a saved profile or add a new one, where you can save settings (impulse intensity for each muscle, etc.) later.
The app is designed to save the most recently set values for a training program in the profile. Therefore, the app overwrites your settings as soon as you switch training programs within a profile.
We recommend creating a separate profile for each training program so you can always set and retrieve the correct values for each program.
Once you have selected a profile, press “Confirm” to go to the training interface with the preset values from the profile highlighted in green. Your changes will be saved there when you later leave this page using “Back” (in the top-right corner).
First, connect the box via Bluetooth. Switch on the charged box (place a finger on the indentation for about 2 seconds) and find it in the eaglefit app via “Bluetooth” at the top right, next to the battery indicator. In the next window, tap “Search.” Select your box (e.g., “eagle_pants0000”) by tapping “Connect” at the end of the row. You will then return to the training interface.
In the training interface, you can adjust the intensity of each pair of electrodes, switch individual electrodes on or off, and access the parameter menu using the green menu icon (three lines at the bottom left).
App Guide
The app is designed to let you create any number of profiles on any device. Each profile stores all settings and parameters for one impulse type (Fitness/Metabolism/Relaxation/Custom/Video Training/HIIT/Fat Burning/Deep Core/). Give each profile an appropriate name.
The name can be, for example, “Thomas_Fitness” or “Muscle building”. In accordance with the GDPR, your data is only stored on your device. This is why you need to create separate profiles on your iPhone and iPad, for example. The app saves the most recently used settings under the logged-in profile as soon as you leave the training screen with the “back arrow”.
Establishing the Bluetooth connection
Communication between the app and your box is established when a Bluetooth connection is made.
To establish the Bluetooth connection, tap “Bluetooth” in the top right the first time you use it.
On the following screen, select “Scan”.
You will see a list of available Bluetooth devices nearby.
Please select “eagle_pants000” to connect to the box.


Requirements for a Bluetooth connection
- The box must be charged and switched on. You can tell by the bright green/blue LED
- Switch on the box by pressing the button (a slight indentation in the middle) for 2 seconds. The LED turns on and glows blue
- To switch it off, press the button for about 6 seconds
- You must grant the app access to your location so that the Bluetooth signal can be processed correctly
- You will NOT find the box in your usual Bluetooth settings on your phone, because we use Bluetooth Low Energy (BLE)
Navigation and EMS impulse settings

- Program selection
- Reset - sets all intensities to "ZERO"
- Select/deselect all intensities for each muscle group
- Increase all activated intensities for each muscle group
- Decrease all activated intensities for each muscle group
- Start/Pause - Start or pause your workout
- Activate/deactivate muscle groups by clicking the muscle name
- Bluetooth menu - tap here to connect the HOME EMS box
- Active workout time
- The green dots show which electrodes are actually activated
- auto: When you activate this switch, your workout starts at an intensity of "0" and the intensity levels increase linearly over 2 minutes to 80% of the preset values. You must adjust the remaining 20% manually
- Sound on/Sound off: Set signal tones to let you know when an active impulse phase is in progress and when there is a break
Settings under “Parameters”
The parameters are already set to default values. Click + or – to adjust the parameters highlighted in black.
The following programs (“modes”) are already preinstalled in the eaglefit EMS System app:
Fitness
Please select the “4/2” setting, meaning a pulse duration of 4 seconds and a 2-second pause. Ideally, tense your muscles for 4 seconds during training and relax them for 2 seconds.
The fitness program is ideal for building large-volume white skeletal muscle. It increases your maximum strength and promotes muscle growth. Your white skeletal muscles are trained most effectively with 6-8 repetitions per muscle group at around 80% of your maximum strength. The impulses are delivered to the respective muscle group at a frequency of 85 Hz, without placing strain on the joints, ligaments or tendons with heavy training weights. The pulse depth in this program is 350 µs.
Fitness training should be combined with exercises and can be complemented, for example, with sling training or HIIT.
Recommended training:
- Strength/weight training
- Few repetitions (6-8)
- 1 set per muscle group
Metabolism/cardiovascular
Please select a pause time of 0 seconds for a continuous pulse. The pulse duration setting does not matter in this case.
The metabolic program, which trains the red endurance muscles, can be used specifically for muscle toning. It is our classic endurance/athletic training program. Activating slow-twitch muscle tissue burns fat and increases muscle definition. The training frequency is 7 Hz with a pulse depth of 350 µs.
This program is ideal for warming up and improving circulation and metabolism. Ideally, metabolic training should be combined with endurance exercises such as:
- Nordic walking
- Jogging
- Cycling
- Exercises on cardio machines
- Yoga
- Static exercises (do not set the intensity too high)
Relaxation
Please select the “1/1” setting, meaning a pulse duration and a pause of 1 second each.
This program produces gentle muscle twitches and promotes muscle recovery, faster regeneration and is also used for functional rehabilitation after illness. At a training frequency of 100 Hz and a pulse depth of 150 µs, tension is relieved and the muscles are supplied with nutrients.
You can use the relaxation program for 5-10 minutes after an intensive workout (with or without EMS), or for 10-30 minutes at a moderate intensity after a tiring day, for example, simply on the sofa.
Choose a low intensity here - the impulse should feel soothing and massage-like.
Custom
Choose the settings according to your preferences or your therapist's recommendations.
Advanced users can freely adjust all parameters in this program (pulse frequency, pulse depth, pulse duration, break, and workout duration). A frequency of 1-120 Hz and a pulse depth of 50 – 400 µs are available.
Deep Core for deep muscles close to the spine
This training program is specifically designed to gently but effectively strengthen the deep muscles close to the spine. The goal is to activate the deep stabilizing muscles in the back to relieve pressure on the intervertebral discs and support the spine over the long term.
How it works:
The program creates a steady alternation between muscle tension and relaxation. The moderate impulses at 27 Hz primarily improve muscular endurance and stability. The relatively long pulse duration provides an intense yet gentle workout, while the short breaks promote steady circulation and recovery.
Area of application:
- Support for back problems associated with disc problems
- Strengthening the deep core muscles
- Prevention of poor posture and muscular imbalances
- Suitable for beginners and people undergoing rehabilitation
Video training
In this program, you can watch an avatar demonstrate exercises and put together a short workout plan from a selection of preset exercises. The special feature is that you can choose a different frequency and pulse depth for each workout. Simply hold your finger over the desired exercise for 2-3 seconds until the preview image lifts, then drag it to the row below and arrange it. You can also remove exercises from the row in the same way.
Fat burning
Please select the “4 / 2” setting, meaning a pulse duration of 4 seconds and a “pause” of 2 seconds. This special program combines the benefits of the fitness and metabolic programs. During the active phase, you train at 60 Hz for maximum strength, while during the passive phase (pause phase), your endurance muscles are engaged at 7 Hz. This way, you alternately challenge both muscle fiber types in one program.
Explosive strength
Use this program to build muscle. Its special feature is that 100% of the set impulse intensity is transmitted from the first second (ramp=0). This setting is particularly effective for athletes with explosive movements (such as golf), ball sports, or reactive sports.
Mobility
The app setting in the eaglefit PRO EMS app for mobility training is based on a special EMS program specifically designed to support muscle length and mobility training (mobility). The training is designed for gentle muscle stimulation to improve stretchability, range of motion and neuromuscular coordination without placing excessive strain on the muscles.
Characteristics of the app setting for mobility training:
- High frequency (120 Hz): This supports gentle muscle activation without strong contractions and is ideal for continuous movement and stretching exercises.
- Long impulse duration (350 µs): This allows the muscles to be reached deeply, which is particularly beneficial during muscle length training and mobility exercises.
- Gentle impulse intensity: The intensity can be adjusted individually and is set to create a noticeable but comfortable muscle contraction - ideal for supporting mobilization without pain or fatigue.
- Dynamic impulse patterns (anterior and posterior chains): You can activate either the anterior or posterior chain with just one click. This automatically helps you feel and activate the right muscles.
- Interval duration: With the preset, you activate the selected muscle chain for 30 seconds at a time and can switch to the other position during the 15-second break.
Setting objective:
EMS support during mobility exercises helps relax tense muscles, improve mobility and, through additional neuromuscular activation, also increase the effectiveness of the workout – especially when combined with targeted stretching and mobility exercises.
Pulse depth
“Pulse depth” lets you set how long the impulse lasts, as set under “Frequency.” This value can only be configured in the “Individual” parameter. A single electrical impulse can last 50-400 µs.
The higher this value is set, the deeper the impulse reaches into the muscle. For example, you can optimally target large muscles such as the thigh muscles, gluteal muscles, or back muscles with a pulse depth of 350 µs.
Pulse duration
Duration of the impulse in seconds, adjustable from 1-40 seconds (indicated by a green number counting down during training).
Break
Length of the break during training, 0-40 seconds (indicated by a red number counting down).
Training
For most training programs, we recommend a duration of about 20 minutes per session.
Frequency
The number of impulses per second. For example, with the “Fitness” training program, the muscles contract and relax 85 times per second.
Putting on and taking off
The eaglefit EMS Vest is available in sizes 3XS to 4XL. It is important to choose a well-fitting size so the electrodes sit close to the body. The Vest can be used as either a dry or wet Vest. When used as a dry Vest, it is put on directly against bare skin, without underwear or other (sports) clothing. The electrodes do not need to be moistened; they should be placed directly on the muscles to be stimulated. Close contact with the skin ensures optimal transmission of the current to the muscles.
For the dry suit’s electrodes to transfer energy through your skin to your nerves and muscles, a very thin film of moisture is needed. For some skin types, wearing the Suit for 2-3 minutes is enough, while others need to warm up for 5 minutes with jumping jacks, burpees or sit-ups before the intensity of the impulses can be increased. If there is no moisture film, you may feel an unpleasant, slight stinging sensation on the surface of your skin. In this case, reduce the impulse intensity for that muscle group and do a few more jumping jacks or squats before increasing the intensity. Heavy body hair or very dry skin can impair stimulation. In this case, you can lightly dampen the skin in the relevant areas with a cloth or use our Electrode Spray.
The eaglefit EMS Vest is fastened with the zipper at the front. If the Vest does not fit snugly in some areas, use the attached hook-and-loop straps to press it against your skin in those areas.
After your workout, unzip the eaglefit EMS Vest and take it off. Then wash the Vest according to the washing instructions or hang it on a clothes hanger to air out.
Training/exercises
General rule: If you feel unwell, stop training immediately and consult a doctor if necessary. Never work out if you are not feeling well or are ill.
Training must also be stopped if there are any problems or malfunctions with the eaglefit EMS Vest. If you experience technical problems, contact the manufacturer.
1. Warming up
Before an EMS workout, just as before any fitness training, the muscles should be prepared for the upcoming exertion. Warming up has the following effects:
- Conductivity between the electrodes and skin increases with light sweating
- Increased core body temperature
- Improved energy supply processes in the muscles
- Increased production of synovial fluid
- Increased motivation and focus on the upcoming workout
For warming up, we recommend a short endurance session, such as a few jumping jacks, burpees, or 3-5 minutes on a stationary bike.
You can already set and activate low impulses here.
2. Training/Exercises
In general, you can perform any movements and workouts with the eaglefit EMS Vest in dry weather, both indoors and outdoors. There are no limits to your imagination. Jogging, boxing, yoga, sling training, functional training, HIIT, or bodyweight training. The Vest should only be kept dry (e.g. avoid rain).
An exercise poster is included with the eaglefit EMS Vest as a guide, showing exercises for the whole body using your own body weight.
3. Stretching
After the workout, you should stretch for 2-3 minutes - possibly in combination with the “Relaxation” program.
Stretching has the following effects:
- Reduced muscle tone
- Improved elimination of metabolic waste products
- Improved muscle recovery
- Improved mobility
Washing and Hygiene Instructions
Before washing the eaglefit EMS Vest, please remove the box.
Proceed as follows:
1. Open the hook-and-loop closure

2. Pull the box upward

Clean the box only with a soft cloth.
We recommend hand-washing the eaglefit EMS Vest. Alternatively, you can wash the Vest in a laundry bag in the washing machine on the delicate cycle at 30 °C. Please remove the box before washing and be sure to fasten the hook-and-loop closure first.
We recommend using the Lavendelkraft laundry detergent. Be sure never to use caustic solvents or abrasives, sports detergent, disinfectant, water softeners such as Calgon, or detergents containing additives such as chlorine or bleach. If the Vest is still too wet after washing, you can spin-dry it at a maximum of 900 rpm. To dry the EMS Vest, simply hang it on a clothes hanger and let it air-dry - preferably with the electrode pairs facing outward. Never tumble-dry the eaglefit EMS Vest or expose it to direct UV radiation. This can damage the material.
The following wash symbols can be found on the eaglefit EMS Vest and should be observed:

Disposal and Recycling
The eaglefit EMS Vest and the box contain electrical components. Electronic devices are recyclable materials and must not be disposed of with household waste. At the end of its service life, dispose of the product in accordance with the applicable legal requirements. By doing so, you fulfill your legal obligations and contribute to environmental protection.
There are collection points for recycling electrical and electronic equipment in all European Union countries. You can obtain information about these collection points from your local waste disposal authority or from the retailer where you purchased this product.
Information on the safe removal of batteries or rechargeable batteries:
If you want to dispose of the box, you can remove the battery by loosening the 4 Phillips screws on the back under the film and unplugging the battery.
- Warning: Make sure the battery is completely discharged
- Carefully remove the battery or rechargeable battery
- The battery or rechargeable battery and the device can now be disposed of separately
Battery type: LiIo; 3.7 V, 3,000 mAh. Chemical system: Lithium-ion battery

Technical specifications
| HOME EMS Box | Value |
|---|---|
| Bluetooth version | > 4.0 |
| Power supply | 5 V, USB C |
| Rechargeable battery | 3.7 V; 3,000 mAh LiPo |
Warranty
You receive a 2-year warranty against defects in materials and workmanship. The warranty is valid in all countries where the eaglefit Vest is officially sold. The warranty does not cover damage caused by improper or negligent handling.
If you feel that individual electrodes have stopped working, you can check this as follows:
- Make sure the muscle group is activated in the app (the muscle name is highlighted in green)
- Switch on the box, attach it to the Suit, and turn the Suit inside out
- Connect the box in the app and select the “Metabolism” program
- Set the impulses for the affected muscle group to intensity 20
- Dampen the electrodes for the affected muscle group with a damp cloth
- For example, place your left hand on the left chest electrode and your right hand on the right chest electrode
Since the current flows through our electrodes from one side to the other, it is important to place each hand on one of the electrodes for the affected muscle group to close the circuit.
If you now feel a tingling in your hands, the electrode pair is intact.
EU Declaration of Conformity

Manufacturer information
eaglefit GmbH is permitted to affix the CE marking to the eaglefit EMS Vest and thereby demonstrate conformity with the relevant EU directives.