Manuals
Instructions EMS CONNECT
Congratulations on choosing your eaglefit CONNECT EMS System. This high-quality training device with up to 28 dry electrodes for electrical muscle stimulation was developed with extensive expertise, so you can perform highly efficient EMS fitness training at home and on the go with minimal effort. The additional forearm and calf electrodes are easy to attach with a hook-and-loop fastener and can be connected by cable to the biceps or hamstring electrode.
About these instructions
EMS devices have been used in physiotherapy and competitive sports for many years.
Whether alone at home, on the go, or with family and friends, the new "EMS CONNECT" app gives you maximum flexibility during your workout. The new CONNECT Box features mesh technology, which turns each box into both a transmitter & receiver, allowing you to choose between individual or group use.
Train with up to eight people - whether with friends or in a group class at the gym.
To get the greatest possible benefit and, above all, to rule out hazards and risks, be sure to read these instructions and follow the rules of conduct described.
We hope you enjoy using the CONNECT EMS System.
Safety instructions
The eaglefit CONNECT EMS System is exclusively a training and fitness device, not a medical device.
Safety Notice
People with heart problems or other cardiovascular conditions, electrical implants, metabolic disorders (e.g., type I or II diabetes, thyroid, liver, or kidney conditions), cancer, an abdominal wall or inguinal hernia, who are pregnant or undergoing chemotherapy, must NOT do this workout! We recommend EMS training only from the age of 18.
You can find our product safety data sheet here: to the safety data sheet
If you are unsure about your health, seek medical advice before starting. This list does not replace an individual medical assessment.
Intended Use
The CONNECT EMS system is a training system based on highly efficient electrical muscle stimulation (EMS) and designed for private use and use in fitness studios.
By combining the CONNECT EMS Box with the eaglefit EMS SYSTEM App, you can work out with EMS at home, in the office, on the go or at the gym. This operating manual will guide you step by step through training and use and provide valuable tips and advice for your EMS workouts.
Improper use
Read the operating instructions and all information and notices carefully to prevent personal injury and property damage and to avoid dangerous situations. If you do not follow the instructions and information on proper handling, eaglefit GmbH accepts no liability for any resulting personal injury or property damage. In such cases, the warranty will also be void.
Before use, please check your CONNECT EMS system for damage and contact the manufacturer or your retailer immediately if you notice anything unusual.
Training with the CONNECT EMS system may only be carried out in a dry environment. Avoid environments with very high humidity where you could come into contact with water (e.g. in the rain, near bathtubs, etc.).
Risks and contraindications
Although no cardiac arrhythmias have ever occurred during training with a CONNECT EMS system, legislation requires a warning about the residual risk. If you have an existing cardiac arrhythmia, training with the CONNECT EMS system is not recommended, as it could otherwise be life-threatening.
Absolute contraindications
- Acute illnesses, bacterial infections or inflammatory processes
- Recent surgeries (< 2 months)
- Arteriosclerosis, arterial circulatory disorders
- Stents or bypasses placed less than 6 months ago
- Untreated high blood pressure
- Diabetes mellitus
- Pregnancy
- Electrical implants, e.g. pacemakers
- Tumors or cancer
- Bleeding disorders, tendency to bleed (hemophilia)
- Neurological diseases, epilepsy or multiple sclerosis
- Abdominal wall or inguinal hernias
- Cardiac arrhythmias
Relative contraindications
- Acute back problems without a diagnosis
- Acute neuralgia, herniated discs
- Implants (prostheses)
- Diseases of the internal organs (especially the kidneys)
- Cardiovascular diseases
- Motion sickness
- Large fluid accumulations in the body, edema
- Open skin injuries, wounds, eczema, burns
- Varicose veins
- Acute effects of alcohol, drugs, or intoxicants
- Taking medication
The CONNECT EMS System must not be used if you have one absolute or several relative contraindications. Training despite existing contraindications can lead to anything from minor injuries to death. We expressly point out that you must not train if any of the contraindications listed applies.
If in doubt, talk to your doctor before use to find out whether EMS training is suitable for you.
Electrical hazards
If you find any damage to any of the components, you must not use the CONNECT EMS System. Handle it with exceptional care to prevent damage to the materials or cables. This means:
- Never use the CONNECT EMS System in a wet environment
- Do not trap or kink the cables, and do not place heavy objects on them
- Remove all piercings or similar items from the training area before training
Damage must be reported to the manufacturer. The manufacturer will then decide how to proceed.
Training with the CONNECT EMS System does not require any specific medical and/or physiological knowledge. However, please note that before your first training session with the CONNECT EMS System, you must read and understand the user manual carefully. Failure to observe the information in this user manual can lead to dangerous situations and, in extreme cases, death. The manufacturer accepts no liability for any damage resulting from non-compliance.
Meaning and how it works
Training using electrical muscle stimulation (electromyostimulation), also known as EMS training, is based on the targeted activation of striated muscles using electrical impulses. This simulates natural muscle activation. This activation causes the muscle fibers to contract without having received a signal from the central nervous system (CNS). Normally, the commands to contract come from the brain. During physical exertion, these electrical impulses are sent to the muscles via nerves. Because the impulses used in EMS training are so similar to those of the CNS, the muscle cannot distinguish their origin, resulting in a contraction, i.e., the command to contract reaches the muscle through the electrodes incorporated into the CONNECT EMS Suit, the CONNECT EMS Vest, or the CONNECT EMS Pants. During EMS training, rhythmic stimuli or impulses act on the muscles being trained, causing them to tense and relax in a targeted manner. In physiotherapy, electrical stimuli are usually used to train only individual muscles or muscle groups, without performing additional movements or fitness exercises.
Unlike pure electrical muscle stimulation in a static position, full-body EMS training combines muscle stimulation with targeted exercises. This also trains your coordination and allows strength gains to be translated into purposeful movement. In addition, this holistic training strengthens the agonist, antagonist, and stabilizing muscles, which are difficult to target and influence with conventional training. This helps prevent muscular imbalances, which can occur when training individual large muscle groups unevenly.
Simultaneous muscle activation can also help prevent or correct protective postures, thereby avoiding improper strain. The option to incorporate additional exercises during EMS training can improve intra- and intermuscular coordination and motor skills. Another positive effect of the additional exercises is that the tendons, ligaments, and joints adapt to the increased strength achieved by the muscles. Since muscle contraction does not require heavy weights, this form of full-body training is very gentle on the joints.
Another advantage is the time saved compared with conventional forms of training:
- Just 20 - 60 minutes of training per week is enough
How the electrodes on the forearms and calves work
The farther we move away from the center of the body, the more sensitively the muscles react to electrical impulses, so the intensity should be set more moderately. For this reason, on the CONNECT Suit, the forearm electrodes are linked to the biceps control and the calf electrodes to the hamstring control. Even without separate control, the forearms and calves are already activated through nearby nerve pathways. The additional electrodes specifically enhance this natural effect, allowing the forearms and calves to be trained effectively and very comfortably at the same time - optimally integrated into the overall EMS workout.
In the training menu for controlling the Pants or Vest, you can adjust each additional electrode separately.
Possible positive effects of EMS training
- Reduction in waist and abdominal circumference
- Reduction in body fat
- Increased endurance and performance
- Possible reduction in back pain
- Improved endurance when putting strain on the back in everyday situations
- With appropriate intensity and proper execution of the exercises, 15 - 20 minutes of EMS training burns approximately 400 - 500 kcal
- Increased maximum performance (movement speed + strength)
Possible specific effects of EMS training
EMS and exercise
- Unlike static exercise, dynamic muscle work can improve blood flow and lymphatic circulation
- Physical activity can improve the tensile strength of tendons and the nourishment of joint cartilage
- Tendons, ligaments and joint cartilage can be strengthened, and bone mineral content and size can increase
- Eccentric strength training in particular affects connective tissue (tendons and ligaments)
- Tendon and ligament damage can be repaired more quickly through targeted activity
- These changes make the body more resilient and can help protect it from injury
EMS and functional training
- Full-body training (muscles, tendons, ligaments)
- The focus is on learning and performing the movement
- Based on stabilizing the body, especially the core muscles
- Can be supplemented with various training equipment (e.g. Sling trainer, balance pad, kettlebell, exercise ball)
EMS and sling training
- Full-body exercises and isolation exercises for individual muscles
- Exercise intensity can easily be varied by changing the angle to the Sling trainer anchor point
- Training the stabilizer muscles with unstable grip ropes, further intensified by a pulley
- Wide variety of exercises thanks to the pulley
- Requires little space
- Easy setup and takedown
EMS and outdoor training
- The focus is on training and movement outdoors
- Full-body exercises
- Exercise intensity is varied using your own body weight, the terrain or everyday objects
- Additional mental benefits from training outdoors
- Motivation through variety
Full-body EMS training offers the opportunity to work out highly effectively and efficiently. It is therefore an excellent way to increase strength, build muscle and reduce fat. It can generate stimulus intensities that are higher than those achieved with conventional training methods.
For these reasons, you need to observe several important conditions during training.
Training preparation
- Full-body EMS training should only be performed when you are in an appropriate physical condition
- Be sure to replenish your carbohydrate stores before training, as the very large muscle mass involved results in a high metabolic load
- You should also make sure to increase your fluid intake before, during and after training
Training progress
- During your first training sessions, you should never overexert yourself. Training should be done with a reduced workout duration (approx. 12 - 15 min.) and an appropriate intensity. The workout duration should then be increased gradually to 20 min.
- For the first eight to ten weeks, you must leave at least four days between training sessions. This is the only way to ensure recovery and positive adaptation
Quick start guide
Quick start guide for your new eaglefit CONNECT EMS system
- Charge the CONNECT Box until the LED turns green
- Download the eaglefit EMS SYSTEM app from the App Store
- Put on the Suit / Vest / Pants – if your skin is extremely dry or you have heavy body hair, moisten the electrodes slightly or use electrode spray
- Switch on the CONNECT Box (gently press into the small recess between the logo and the LED with your index finger for 2 seconds), attach it to the Suit, and start the app
- Assign a new profile name for the next workout
- Establish a Bluetooth connection to the CONNECT Box (click “Bluetooth” at the top right, then “Scan,” then “Connect”)
- Under “Parameters,” adjust the settings for the profile, warm up sufficiently, then press “Start”
- Gradually increase the intensity of the muscles by process of elimination (press the + button until the setting is strong enough, tap the number for the relevant muscle so that it is highlighted in gray)
- Start your workout, and end it after 20 minutes
- Save settings by exiting the app using the arrow at the top left
- Make sure to drink enough water before, during and after your workout, at least 1/2 liter more than usual
- Allow at least 4 days between workouts (during the first 10 weeks, a maximum of 1 workout per week)
Feel free to also watch our detailed onboarding video: EMS Onboarding
Application tips
Switching the Box on/off correctly:
- To switch on: Press for 2 seconds gently with your index finger into the recess between the logo and the LED
- To switch off: Press for 6 seconds gently with your index finger into the recess between the logo and the LED
We deliberately set the time required to switch off the Box to 6 seconds so that you don't accidentally touch the Box during your workout and switch it off unintentionally.

Emergency stop switch
To switch off the Box quickly in an emergency, there is an emergency stop switch on the underside of the Box. When pressed, the Box switches off immediately and the Suit is no longer supplied with power.
First use of the CONNECT EMS Box and the app
Charging the CONNECT EMS Box
Before you can start training, please download and install the eaglefit EMS SYSTEM app from your app store by searching for “eaglefit” or “eaglefit EMS SYSTEM”.
Before using the CONNECT EMS Box for the first time, you must charge its battery for at least 3 hours. Our batteries have overcharge protection, so you cannot “overcharge” them. Use the supplied USB cable and 220 V power adapter to charge it. While charging, the indicator on the CONNECT EMS Box lights up blue. When the battery is fully charged, the indicator lights up green.
Download the eaglefit EMS SYSTEM app from your app store:
Or try our new and improved eaglefit CONNECT EMS app:
Find the CONNECT EMS app guide here: CONNECT EMS APP guide
First launch
When you start the app, you can first choose from the main categories EMS BELT, HOME EMS, PRO EMS & CONNECT EMS.

After selecting CONNECT EMS, you can choose from the relevant products in the subcategory: EMS Pants, EMS Vest, or EMS CONNECT (Suit).

If you are using the app for the first time, you must first create a profile for your training. Since the app is designed to save the most recently set values for a training program, we recommend creating a separate profile for each training program (e.g., Thomas Fitness, Thomas Cardio, Thomas Relaxation...). This way, the appropriate values are always available for each training program.

Previously created profiles are shown in the overview. Select an existing profile or create a new one to save your settings (e.g., impulse intensity for each muscle).
After selecting a profile, tap “Confirm” to go to the training interface with the saved values.
Switch on the charged CONNECT Box (place your finger on the indentation for about 2 seconds). Then open the device overview in the app via Bluetooth (top right, next to the battery indicator) and tap “Search.” The app will then show you compatible CONNECT Boxes. Select your CONNECT EMS Box (e.g., “eagle_con000”) by tapping “Connect” at the end of the row.

You will then return to the training interface, where you can adjust the intensity of each electrode pair, switch individual electrodes on or off, and select different programs using the program button at the bottom left.

App guide
The app is designed to let you create any number of profiles on each device. Since each profile always stores the most recently set values for a training program, we recommend creating a separate profile for each training program. This way, the right values are always saved for each training program, without having to set everything up from scratch each time. Give each profile you create a suitable name. For example, the name could be “Thomas_Fitness” or “Muscle Building”.
To train in a group with CONNECT EMS, you need the EMS CONNECT app. You can find it here: to the CONNECT EMS APP guide
ESTABLISHING THE BLUETOOTH CONNECTION
Communication between the app and your CONNECT EMS box will be established once a Bluetooth connection is made.
To establish the Bluetooth connection, tap the Bluetooth icon in the top right, next to the battery indicator, the first time you use it.
Press “Scan” to find the CONNECT EMS box nearby.
All available CONNECT EMS boxes nearby will now be displayed in the overview.
Please select “eagle_con000” to establish a connection to the CONNECT EMS box.

Requirements for a Bluetooth connection
- The CONNECT EMS box must be charged and switched on. You can tell by the bright glow of the green/blue LED
- Switch on the CONNECT EMS box by pressing the button (a slight indentation in the center) for 2 seconds. The LED will turn on and glow blue
- To switch it off, press the button for about 6 seconds
- You must grant the app access to your location so the Bluetooth signal can be processed correctly
- You will NOT find the CONNECT EMS box in your usual Bluetooth settings on your phone because we use Bluetooth Low Energy (BLE)
Navigation and settings for EMS impulses

- Program selection
- Reset - sets all intensities to “ZERO”
- Select/deselect all intensities for each muscle group
- Increase all activated intensities for each muscle group
- Decrease all activated intensities for each muscle group
- Start/Pause - Start or pause your training
- Activate/deactivate muscle groups by tapping the name of the muscle
- Bluetooth menu - Tap the icon here to connect the CONNECT EMS box
- Active training time
- The green dots indicate which electrodes are actually activated
Settings under “Parameters”
The parameters already have default settings. Click + or - to adjust the parameters highlighted in black.
The following programs (“modes”) are already preinstalled in the eaglefit EMS SYSTEM app:
Fitness
Please select the “4/2” setting, meaning a pulse duration of 4 seconds and a 2-second pause. Ideally, tense your muscles for 4 seconds during training and relax them for 2 seconds.
The fitness program is ideal for building large-volume white skeletal muscle. It can increase your maximum strength and promote muscle growth. White skeletal muscles are best trained with 6-8 repetitions per muscle group at approximately 80% of maximum strength. Pulses are delivered to the relevant muscle group at a frequency of 85 Hz, without placing excessive strain on the joints, ligaments, or tendons with heavy training weights. The pulse depth in this program is 350 µs.
Fitness training should be combined with exercises and can be complemented, for example, with sling training or HIIT.
Recommended training:
- Strength / weight training
- few repetitions (6-8)
- 1 set per muscle group
Metabolism / cardiovascular
Please select a pause time of 0 seconds to create a continuous pulse. The pulse duration setting does not matter in this case.
The metabolic program, which primarily trains red endurance muscle fibers, can be used specifically for muscle toning. It is our classic endurance / athletic training program. Activating slow-twitch muscle fibers can reduce fat and improve muscle definition. The training frequency is 7 Hz with a pulse depth of 350 µs.
This program is ideal for warming up and improving circulation and metabolism. Ideally, combine metabolic training with endurance exercises such as:
- Nordic walking
- Jogging
- Cycling
- Exercises on cardio machines
- Yoga
- Static exercises (do not set the intensity too high)
Relaxation
Please select the “1/1” setting, meaning a pulse duration and pause of 1 second each.
This program produces gentle muscle twitches and promotes muscle recovery, faster regeneration and is also used for functional rehabilitation after illness. At a training frequency of 100 Hz and a pulse depth of 150 µs, it can relieve tension and supply the muscles with nutrients.
You can use the relaxation program for 5-10 minutes after an intense workout (with or without EMS), or for 10-30 minutes at a moderate intensity after a demanding day, for example, simply while sitting on the sofa.
Choose a low intensity here - the pulse should provide a pleasant, massage-like sensation.
Individual
Choose the settings according to your individual preferences or therapeutic recommendations.
Advanced users can freely adjust all parameters with this program (pulse frequency, pulse depth, pulse duration, pause, and workout duration). Frequencies of 1 - 120 Hz and pulse depths of 50 - 400 µs are possible.
Deep Core for deep muscles near the spine
This training program is specifically designed to gently but effectively strengthen the deep muscles near the spine. Its goal is to activate the deep stabilizing muscles in the back to relieve pressure on the intervertebral discs and support the spine over the long term.
How it works:
The program creates a steady alternation between muscle tension and relaxation. Moderate impulses at 27 Hz primarily improve muscular endurance and stability. The relatively long pulse duration provides an intensive yet gentle workout, while the short pauses support steady circulation and recovery.
Area of use:
- Support for back problems associated with disc issues
- Strengthening the deep core muscles
- Prevention of poor posture and muscular imbalances
- Suitable for beginners as well as people undergoing rehabilitation
Video training
In this program, you can watch an avatar demonstrate exercises and put together a short training plan from a selection of pre-set exercises. What makes it special is that you can choose a different frequency and pulse depth for each workout. Simply keep your finger over the desired exercise for two to three seconds until the preview image is highlighted, then drag it down to the row below and arrange it. You can remove exercises from the row in the same way.
Fat burning
For this setting, please select a pulse duration of 4 seconds and a “pause” of 2 seconds. This special program combines the benefits of the fitness and metabolic programs. During the active phase, you train at 60 Hz for maximum strength, while in the passive phase (pause phase), your endurance muscles are engaged at 7 Hz. This way, you alternately challenge both types of muscle fibers in a single program.
Explosive strength
This program is for building muscle. Its special feature is that 100% of the set impulse intensity is delivered from the first second (ramp=0). This setting is particularly effective for athletes with explosive movements (such as golf), ball sports, or reactive sports.
Mobility
The app setting of the eaglefit EMS SYSTEM app for mobility training is based on a special EMS program specifically designed to support muscle length and mobility training (mobility). The training is designed for gentle muscle stimulation to improve flexibility, range of motion and neuromuscular coordination without placing excessive strain on the muscles.
Characteristics of the app setting for mobility training:
- High frequency (120 Hz): This supports gentle muscle activation without strong contractions and is ideal for sustained movements and stretching exercises.
- Long pulse duration (350 µs): This reaches the deeper muscles, which is particularly beneficial for muscle length training and mobility exercises.
- Gentle impulse intensity: The intensity can be adjusted individually and selected to produce a pleasantly noticeable muscle contraction - ideal for supporting mobilization without pain or fatigue.
- Dynamic impulse patterns (anterior and posterior chains): You can activate either the anterior or posterior chain with just one click. This automatically helps you feel and activate the right muscles.
- Interval duration: With the preset, you activate the selected muscle chain for 30 seconds at a time and can move into the other position during the 15-second break.
Purpose of the setting:
EMS support during mobility exercises helps loosen tense muscles, improve mobility, and increase training effectiveness through additional neuromuscular activation - especially when combined with targeted stretching and mobilization exercises.
Pulse depth
“Pulse depth” lets you adjust how long the impulse lasts, as set under “Frequency.” This value can only be configured in the “Individual” parameter. A single electrical impulse can last 50-400 µs.
The higher this value is set, the deeper the impulse reaches into the muscle. For example, you can effectively target large muscles such as the thigh, gluteal, or back muscles with a pulse depth of 350 µs.
Pulse duration
Impulse duration in seconds, adjustable from 1 - 40 seconds (indicated by a green number that counts down during training).
Pause
Pause duration: 0-40 seconds (indicated by a red number counting down).
Training
For most training programs, we recommend a duration of approximately 20 minutes per session.
Frequency
The number of impulses per second. For example, in the “Fitness” training program, the muscles tense and relax 85 times per second.
How the electrodes on the forearms and calves work
The farther we move from the center of the body, the more sensitively the muscles react to electrical impulses, so the intensity should be set more moderately. For this reason, the forearm electrodes on the CONNECT Suit are linked to the biceps control, and the calf electrodes to the hamstring control. Even without separate activation, the forearms and calves are already activated along nearby nerve pathways. The additional electrodes specifically enhance this natural effect, so the forearms and calves are trained effectively and very comfortably at the same time, optimally integrated into the overall EMS workout.
Putting on and taking off
The CONNECT EMS components (Suit, Pants & Vest) are available in sizes 3XS to 4XL. It is important to choose the right size so the electrodes fit snugly against the body. The CONNECT EMS components can be used both as dry and wet components. When used as dry equipment, the product is worn directly on bare skin, without underwear or other clothing (including sportswear). The electrodes do not need to be wetted and should be placed directly over the muscles to be stimulated. Close contact with the skin ensures optimal transmission of the current to the muscle.
For the electrodes in the dry equipment to transfer energy through your skin to your nerves and muscles, a very thin film of moisture is needed. Some skin types need only two to three minutes of wearing the product, while others need to warm up for five minutes with jumping jacks, burpees, or sit-ups before increasing the intensity of the impulses. If there is no moisture film, you may feel an unpleasant, mild stinging on the surface of your skin. In this case, reduce the impulse intensity for that muscle group and do a few more jumping jacks or squats before increasing the intensity. Heavy body hair or very dry skin can impair stimulation. In this case, you can lightly dampen the skin in the affected areas with a cloth or use our electrode spray.
The CONNECT EMS Suit closes with a zipper at the back, while the CONNECT EMS Vest has a zipper at the front. To make the Suit easier to put on, pull the zipper up using the attached cord and hold the bottom of the zipper in place with your other hand. This tightens the zipper so you can pull it up easily using the cord. At the bottom, there is a small, square fabric patch attached to the Suit with a hook-and-loop fastener. You can remove it, place the zipper cord over the hook-and-loop fastener, then reattach the fabric patch. This keeps the cord from dangling during your workout. If the Suit or Pants do not fit snugly in some areas, you can purchase hook-and-loop straps for your arms and legs from our shop, or use the included waist belt on your lower back to press the Suit against your skin in those areas too. The Vest has several buckles that you can use to adjust its fit. Alternatively, you can wear tight-fitting clothing over the CONNECT EMS components to achieve the same effect.
After training, open the zipper and turn the Suit inside out as you take it off. Remove the Pants in the same way, while taking off the Vest as you normally would. Then wash your CONNECT EMS components according to the washing instructions or leave them to air out on a clothes hanger.
Training and exercises
General rule: If you feel unwell, stop training immediately and consult a doctor if necessary. Never work out if you are feeling unwell or sick.
Training must also be stopped if there are any problems or malfunctions with the CONNECT EMS system. Contact the manufacturer if you experience technical problems.
1. Warm-up
As with any fitness workout, your muscles should be prepared for the upcoming exertion before an EMS workout. Warming up has the following effects:
- Conductivity between the electrodes and skin increases with light sweating
- Increased core body temperature
- Improved energy supply processes in the muscles
- Increased production of synovial fluid
- Increased motivation and focus on the upcoming workout
To warm up, we recommend a short cardio session, for example, a few jumping jacks, burpees, or three to five minutes on a stationary bike.
You can already set and activate low-level impulses at this stage.
2. Training/exercises
In general, you can perform any movements and workouts indoors or outdoors with the CONNECT EMS components in dry weather. The only limit is your imagination. Jogging, boxing, yoga, sling training, functional training, HIIT, or bodyweight training. The Suit should only be kept away from moisture (e.g. rain).
As inspiration, your order includes a training poster showing exercise options for the whole body using your own body weight.
3. Stretching
After your workout, you should stretch for 2-3 minutes, possibly combined with the “Relaxation” program.
Stretching has the following effects:
- Reduced muscle tone
- Improved removal of metabolic waste products
- Improved muscle recovery
- Improved mobility
Washing and hygiene instructions
Before washing your CONNECT EMS Suit, Pants, or Vest, please remove the CONNECT EMS Box.
To remove the CONNECT EMS Box, unlock the locking mechanism and take off the Box

Clean the CONNECT EMS Box only with a soft cloth.
We recommend hand-washing the CONNECT EMS Suit, CONNECT EMS Vest & CONNECT EMS Pants. Alternatively, you can wash your equipment in a laundry bag in the washing machine on a delicate or gentle cycle at 30 °C. Before washing, please remove the Box and be sure to close the zipper and all hook-and-loop fasteners.
We recommend using Lavendelkraft detergent. Make sure you never use corrosive solvents or abrasive cleaners, sports detergents, disinfectants, water softeners such as Calgon, or detergents with additives such as chlorine or bleach. If your EMS equipment is still too wet after washing, you can spin-dry it at a maximum of 900 rpm. To dry, simply hang the Suit, Pants, or Vest on a clothes hanger and leave it to air-dry, preferably with the electrode pairs facing outward. Never tumble-dry your CONNECT EMS components or expose them to direct UV radiation. This may damage the material.
The following washing symbols can be found on the eaglefit CONNECT EMS components and should be followed:

Disposal and recycling
The eaglefit CONNECT EMS components and the CONNECT EMS Box contain electrical components. Electronic devices are recyclable materials and do not belong in household waste. At the end of its service life, dispose of the product in accordance with the applicable legal regulations. By doing so, you fulfill your legal obligations and contribute to environmental protection.
There are collection points for recycling electrical and electronic equipment in all countries of the European Union. You can get information about these collection points from your local waste disposal authority.
Please follow your country's specific disposal regulations outside the European Union.
Information on safely removing the batteries or rechargeable battery:
If you want to dispose of the CONNECT EMS Box, you can remove the rechargeable battery by loosening the 4 Phillips screws on the back under the film and unplugging the battery.
- Warning: Make sure the battery is fully discharged
- Carefully remove the battery or rechargeable battery
- The battery or rechargeable battery and the device can now be disposed of separately
Battery type: LiPo; 3.7 V, 3,000 mAh. Chemical system: lithium-polymer battery

Technical data
| CONNECT EMS Box | Value |
|---|---|
| Bluetooth version | > 4.0 |
| Power supply | 5 V, USB-C |
| Rechargeable battery | 3.7 V; 3,000 mAh LiPo |
Warranty
You receive a 2-year warranty against material and workmanship defects. The warranty is valid in all countries where the CONNECT EMS System is officially sold by eaglefit. The warranty does not cover damage caused by improper or negligent handling.
If you think that individual electrodes have stopped working, you can check as follows:
- Make sure the muscle group is activated in the app (the muscle name is highlighted in green)
- Switch on the CONNECT EMS Box, attach it to the Suit, Vest, or Pants, and turn the garment inside out
- Connect the CONNECT EMS Box in the app and select the “Metabolism” program
- Set the impulses for the affected muscle group to intensity 20
- Moisten the electrodes of the affected muscle group with a damp cloth
- Now place your left hand on the left chest electrode, for example, and your right hand on the right chest electrode
Since the current flows from one side to the other through our electrodes, it is important to place each hand on one of the electrodes for the affected muscle group to close the circuit.
If you feel a tingling sensation in your hands now, the pair of electrodes is intact.
EU Declaration of Conformity

Manufacturer information
eaglefit® GmbH is permitted to affix the CE marking to the CONNECT EMS System, thereby demonstrating compliance with the relevant EU directives. More EMS devices from eaglefit.