Manuals

Instructions EMS PANTS

Congratulations on choosing the eaglefit EMS Pants System. This high-quality electrical muscle stimulation training device was developed with extensive expertise so that you can do highly efficient EMS fitness training at home and on the go with minimal effort.

About these instructions

EMS devices have been used in physiotherapy and competitive sports for many years. With this device, you can do targeted training at home or on the go, in a hotel or in the office, while following the safety instructions and warnings.

To get the greatest possible benefit and, above all, to avoid hazards and risks, you should read these instructions carefully and follow the described rules of conduct.

We hope you enjoy using your eaglefit EMS Pants.

Safety instructions

Intended use

The eaglefit EMS Pants are a training system based on highly efficient electrical muscle stimulation (EMS) and developed for private use. By combining the HOME or PRO Box with the eaglefit EMS System App, you can do EMS training anytime at home, in the office, or on the go. This user manual will guide you through the training and operation step by step and provide valuable tips and advice for your EMS training.

The eaglefit EMS Pants are exclusively a training and fitness device, not a medical product.

Safety notice

People with heart problems or other cardiovascular diseases, electrical implants, metabolic disorders (e.g., type I or II diabetes, thyroid, liver or kidney conditions), cancer, an abdominal wall or inguinal hernia, who are pregnant or undergoing chemotherapy, must NOT do this training! We recommend EMS training only for people aged 18 and over.

Here you can find our safety data sheet for the product: to the safety data sheet

If you have any concerns about your health, seek medical advice before starting. This list does not replace an individual medical assessment.

Improper use

Read the operating instructions and all information and notices carefully to prevent personal injury and property damage and to avoid dangerous situations. If you do not follow the instructions and information on proper handling, eaglefit GmbH accepts no liability for any resulting personal injury or property damage. The warranty will also be void in such cases.

Please check your eaglefit EMS Pants for damage before use and contact the manufacturer or your dealer immediately if you notice anything unusual.

Training with the eaglefit EMS Pants may only be carried out in a dry environment. Avoid environments with very high humidity where you could come into contact with water (e.g. in the rain, near bathtubs, etc.).

Risks and contraindications

Although no cardiac arrhythmias have ever occurred during training with an eaglefit EMS Pants, legislation requires us to warn of a residual risk. If you have an existing cardiac arrhythmia, training with the eaglefit EMS Pants is not recommended, as it could otherwise be life-threatening.

Absolute contraindications

  • Acute illnesses, bacterial infections or inflammatory processes
  • Recent surgeries (< 2 months)
  • Arteriosclerosis, arterial circulatory disorders
  • Stents or bypasses placed less than 6 months ago
  • Untreated high blood pressure
  • Diabetes mellitus
  • Pregnancy
  • Electrical implants, e.g. pacemakers
  • Tumors or cancer
  • Bleeding disorders, bleeding tendencies (hemophilia)
  • Neurological diseases, epilepsy or multiple sclerosis
  • Abdominal wall or inguinal hernias
  • Cardiac arrhythmias

Relative contraindications

  • Acute back pain without a diagnosis
  • Acute neuralgia, herniated discs
  • Implants (prostheses)
  • Diseases of the internal organs (especially kidneys)
  • Cardiovascular diseases
  • Motion sickness
  • Major fluid accumulations in the body, edema
  • Open skin injuries, wounds, eczema, burns
  • Varicose veins
  • Acute influence of alcohol, drugs, intoxicants
  • Taking vaccines

The eaglefit EMS System must not be used if there is one absolute contraindication or several relative contraindications. Training despite existing contraindications can lead to anything from minor injuries to death. We expressly advise that you must not train if any of the listed contraindications apply.

If in doubt, talk to your doctor before use to find out whether EMS training is suitable for you.

Electrical Hazards

If you find any damage to any of the components, you must not use the eaglefit EMS Pants. Handle them with exceptional care to prevent damage to the material or cables. This means:

  • Never use the eaglefit EMS Pants in wet environments
  • Do not pinch or kink the cables, and do not place heavy objects on them
  • Remove all piercings or similar items from the training area before your workout

Any damage must be reported to the manufacturer. The manufacturer will then decide how to proceed.

Training with the eaglefit EMS Pants does not require any specific medical and/or physiological knowledge. However, before your first workout with the eaglefit EMS Pants, you must read and understand the operating instructions carefully. Failure to follow the information provided in these operating instructions can lead to dangerous situations and, in extreme cases, death. The manufacturer accepts no liability for any resulting damage in the event of non-compliance.

Meaning and How It Works

Training using electrical muscle stimulation (electromyostimulation), also known as EMS training, is based on the targeted activation of striated muscles by electrical impulses. This simulates natural muscle activation. When activated, the muscle fibers contract without receiving a signal from the central nervous system (CNS). Normally, the commands for a contraction come from the brain. During physical exertion, these electrical impulses are sent to the muscles via nerves. Because the impulses used in EMS training are so similar to those of the CNS, the muscle cannot distinguish their origin, resulting in a contraction; in other words, the command to contract reaches the muscle through the electrodes integrated into the eaglefit EMS Pants. During EMS application, rhythmic stimuli or impulses act on the muscles being trained, causing them to tense and relax in a targeted way. In physical therapy, usually only individual muscles or muscle groups are trained using electrical stimuli, without additional movements or fitness exercises.

While no movements are performed alongside electrical muscle stimulation, full-body EMS training involves targeted exercises. This also trains your coordination and allows you to apply your increased strength to specific movements. In addition, this holistic training strengthens the agonists, antagonists and stabilizing muscles, which are difficult to target and influence with conventional training. This prevents muscular imbalances, which can occur when training individual large muscle groups in isolation.

Furthermore, simultaneous muscle activation can help avoid or train away protective postures, preventing incorrect strain. The option to incorporate additional exercises during EMS training can improve intra- and intermuscular coordination, as well as motor skills. Another positive effect of the additional exercises is that the tendons, ligaments and joints adapt to the increase in muscle strength achieved. Since heavy weights are not needed to contract the muscles, this form of full-body training is very easy on the joints.

Another advantage is the time saved compared with conventional forms of training:

  • Just 20-60 minutes per week is enough

Possible positive effects of EMS training

  • Reduction in waist and abdominal circumference
  • Reduction in body fat
  • Increased endurance and performance
  • Back pain may be reduced
  • Improved endurance when putting strain on the back in everyday situations
  • 15-20 minutes of EMS training burns approximately 400-500 kcal with appropriate intensity and exercise execution
  • Increased maximum performance (movement speed + strength)

Possible specific effects of EMS training

EMS and movement

  • Unlike static work, dynamic muscle activity improves blood flow and lymph circulation
  • Physical activity improves the tensile strength of tendons and the nourishment of joint cartilage
  • Tendons, ligaments and joint cartilage are strengthened, while bone mineral content and bone size increase
  • Eccentric strength training in particular affects connective tissue (tendons and ligaments)
  • Tendon and ligament damage can be repaired more quickly through targeted activity
  • These changes make the body more resilient and protect it from injuries

EMS and functional training

  • Full-body training (muscles, tendons, ligaments)
  • The focus is on learning and performing the movement
  • Based on stabilizing the body, particularly the core muscles
  • Can be supported by various training equipment (e.g. Sling trainer, balance pad, kettlebell, exercise ball)

EMS and Sling Training

  • Full-body exercises and isolation exercises for individual muscles
  • The intensity of the workout can easily be varied by changing the angle to the Sling Trainer's anchor point
  • Training the stabilizing muscles with unstable grip ropes, further intensified by a pulley
  • Wide variety of exercises thanks to the pulley
  • Requires little space
  • Easy to set up and take down

EMS and outdoor training

  • The focus is on training and exercising outdoors
  • Full-body exercises
  • Exercise intensity can be varied using your own body weight, the terrain or everyday objects
  • Additional psychological benefits from exercising outdoors
  • Motivation through variety

EMS training offers a highly effective and time-efficient way to work out. It is therefore an excellent way to increase strength, build muscle and reduce fat. It can generate stimulation intensities that are higher than those achieved with conventional training methods.

For these reasons, there are a few important conditions to observe when training.

Workout preparation

  • Full-body EMS training should only be performed when you are in suitable physical condition
  • Be sure to replenish your carbohydrate stores before working out, as the large muscle mass involved places a high metabolic load on your body
  • You should also make sure to increase your fluid intake before, during and after your workout

Workout progress

  • During your first workouts, make sure not to overexert yourself. Start with a shorter workout (approx. 12-15 min.) and an appropriate intensity. Then gradually increase the workout duration to 20 min.
  • For the first 8-10 weeks, allow at least 4 days between workouts. This is the only way to ensure recovery and positive adaptation

Quick start guide

Quick start guide for your new eaglefit EMS Pants

  1. Charge the box until the LED lights up green
  2. eaglefit EMS System App download it from the App Store download
  3. Put on the Pants – if your skin is extremely dry or you have a lot of body hair, moisten the electrodes slightly or use electrode spray
  4. Turn on the box (press lightly with your index finger into the small recess between the logo and the LED for 2 seconds), attach it to the suit, start the app
  5. Assign a new profile name for the following workout
  6. Establish a Bluetooth connection to the box (tap “Bluetooth” at the top right, then “Search,” then “Connect”)
  7. Under “Parameters,” adjust the profile settings, warm up sufficiently, then press “Start”
  8. Increase the intensity of the muscles one by one (press the up arrow until the setting is strong enough, then tap the number above the muscle so that it is outlined in gray)
  9. Start your workout, then end it after 20 minutes
  10. Save your settings by exiting the app using the arrow at the top left
  11. Make sure to drink enough water before, during and after your workout, at least 1/2 liter more than usual
  12. Take a break of at least 48 hours (for the first 10 weeks, no more than 1 workout per week)

Feel free to watch our detailed onboarding video too: EMS Onboarding

Usage tips

Switching the box on/off correctly:

  • To switch it on, press lightly for 2 seconds with your index finger into the recess between the logo and the LED
  • To switch it off, press lightly for 6 seconds with your index finger into the recess between the logo and the LED

We deliberately set the time needed to switch off the box to 6 seconds so that you don't accidentally touch the box during your workout and switch it off unintentionally.

Usage tips – EMS PANTS
Usage tips

First use of the box and app

Charging the box

Before you can start training, please download and install the eaglefit EMS System App from your app store by searching for “eaglefit” or “eaglefit EMS System.”

Before using the box for the first time, you must charge its battery for at least 3 hours. Our batteries have overcharge protection, so you cannot “overcharge” them. Use the supplied USB cable and 220 V power adapter to charge the battery. While charging, the box indicator lights up blue. When the battery is fully charged, the indicator lights up green.

Download the eaglefit EMS System App from your app store:

First launch

When you start the app, you can first choose between the different boxes (BELT, HOME, PRO or CONNECT). Then select the appropriate product.

When using the app for the first time, create a profile for your workout. Under “Select profile,” you can save all your settings for later.

Charging the PRO Box – EMS PRO
Charging the box
Charging the HOME Box – EMS HOME
Charging the box

If you have already created profiles, they will be displayed. Select a saved profile or add a new one, where you can save settings (impulse intensity for each muscle, etc.) later.

The app is designed to save the most recently set values for a training program in the profile. Therefore, the app overwrites your saved values as soon as you switch training programs within a profile.

We recommend creating a separate profile for each training program so you can always set and access the correct values for each program.

Once you have selected a profile, press “Confirm” to go to the training screen with the preset values of the profile highlighted in green. Your changes will be saved when you later leave this page using the “Back arrow” in the top-right corner.

First, connect the box via Bluetooth. Turn on the charged box (place a finger on the indentation for about 2 seconds) and find it in the eaglefit app by tapping “Bluetooth” at the top right next to the battery indicator, then tapping “Search” in the next window. Select your box by tapping “Connect” at the end of its row. You will then return to the training screen.

On the training screen, you can adjust the intensity of each electrode pair, switch individual electrodes on or off, and access the parameter menu by tapping the green menu icon (three lines at the bottom left).

App guide

The app is designed to let you create as many profiles as you like on each device. A profile stores all the settings and parameters for one impulse type (Fitness/Metabolism/Relaxation/Custom/Video Training/HIIT/Fat Burning/Deep Core/). Give each profile an appropriate name.

The name could be, for example, “Thomas_Fitness” or “Muscle Building”. Your data is stored only on your device, in accordance with the GDPR. Therefore, you need to create separate profiles on your iPhone and iPad, for example. The app saves the most recently used settings under the signed-in profile as soon as you leave the training screen using "Back arrow".

Establishing the Bluetooth connection

Communication between the app and your box will be established once a Bluetooth connection is made.

To establish the Bluetooth connection, tap “Bluetooth” in the top right the first time you use it.

In the next view, select “Scan”.

You will see a list of available Bluetooth devices nearby.

Please select the box to connect to it.

Establishing the Bluetooth connection – EMS PANTS
Establishing the Bluetooth connection
Establishing the Bluetooth connection – EMS PANTS
Establishing the Bluetooth connection

Requirements for a Bluetooth connection

  • The box must be charged and switched on. You can tell by the bright green/blue LED
  • Turn on the box by pressing the button (a slight indentation in the center) for 2 seconds. The LED turns on and glows blue
  • To switch it off, press the button for about 6 seconds
  • You must allow the app to access your location so that the Bluetooth signal can be processed correctly
  • You will NOT find the box in your usual Bluetooth settings on your phone, as we use Bluetooth Low Energy (BLE)

Navigation and EMS impulse settings

Navigation and EMS impulse settings – EMS PANTS
Navigation and EMS impulse settings
  1. Program selection
  2. Reset - sets all intensities to "NULL"
  3. Select/deselect all intensities for each muscle group
  4. Increase all activated intensities for each muscle group
  5. Decrease all activated intensities for each muscle group
  6. Start/Pause - start or pause your training
  7. Activate/deactivate muscle groups by tapping the muscle name
  8. Bluetooth menu - tap here to connect the HOME EMS Box
  9. Active training time
  10. The green dots show which electrodes are actually activated

Settings under “Parameters”

The parameters already have default settings. Click + or – to adjust the parameters shown in black.

The following programs (“modes”) are already preinstalled in the eaglefit EMS System app:

Fitness

Please select the “4/2” setting, meaning a pulse duration of 4 seconds and a pause of 2 seconds. Ideally, tense your muscles for 4 seconds during training, then relax them for 2 seconds.

The fitness program is ideal for building large-volume white skeletal muscle. It increases your maximum strength and promotes muscle growth. Your white skeletal muscles are best trained with 6-8 repetitions per muscle group at approximately 80% of your maximum strength. The impulses are delivered to each muscle group at a frequency of 85 Hz, without putting strain on the joints, ligaments, or tendons with heavy training weights. The pulse depth in this program is 350 µs.

Fitness training should be combined with exercises and can be supplemented, for example, with sling training or HIIT.

Recommended training:

  • Strength/weight training
  • few repetitions (6-8)
  • 1 set per muscle group

Metabolism/cardiovascular

Please select a pause time of 0 seconds for a continuous pulse. The pulse duration setting does not matter in this case.

The metabolic program, which trains the red endurance muscles, can be used specifically for muscle toning. It is our classic endurance/athletic program. Activating slow-twitch muscle tissue burns fat and increases muscle definition. The training frequency is 7 Hz with a pulse depth of 350 µs.

This program is ideal for warming up and improving circulation and metabolism. Metabolic training should ideally be combined with endurance exercises such as:

  • Nordic walking
  • Jogging
  • Cycling
  • Exercises on cardio machines
  • Yoga
  • Static exercises (do not set the intensity too high)

Relaxation

Please select the “1/1” setting, meaning a pulse duration and a pause of 1 second each.

This program produces gentle muscle twitches and promotes muscle recovery, faster regeneration and is also used for functional recovery after illness. At a training frequency of 100 Hz and a pulse depth of 150 µs, it relieves tension and supplies the muscles with nutrients.

You can use the relaxation program for 5-10 minutes after an intense workout (with or without EMS), or for 10-30 minutes at a moderate intensity after a strenuous day, for example while relaxing on the sofa.

Choose a low intensity here - the impulse should provide a soothing, massaging sensation.

Individual

Choose the settings based on your individual preferences or therapeutic recommendations.

Advanced users can freely adjust all parameters with this program (impulse frequency, impulse depth, impulse duration, pause, and training duration). A frequency of 1-120 Hz and a pulse depth of 50 – 400 µs are possible.

Deep Core for deep muscles close to the spine

This training program is specifically designed to gently but effectively strengthen the deep muscles close to the spine. The goal is to activate the deep stabilizing muscles in the back to relieve pressure on the intervertebral discs and support the spine over the long term.

How it works:

The program produces a steady alternation between muscle tension and relaxation. The moderate impulses at 27 Hz primarily improve muscular endurance and stability. The relatively long pulse duration provides an intensive yet gentle workout, while the short breaks support consistent circulation and recovery.

Area of application:

  • Support for back problems related to disc issues
  • Strengthening the deep core muscles
  • Prevention of poor posture and muscular imbalances
  • Suitable for beginners as well as people in rehabilitation

Video training

In this program, an avatar demonstrates training exercises, and you can put together a short training plan from a selection of preset exercises. The special feature is that you can choose a different frequency and pulse depth for each exercise. Simply hold your finger over the desired exercise for 2-3 seconds until the preview image lifts, then drag it to the row below and arrange it. You can remove exercises from the row in the same way.

Fat burning

Please select the “4 / 2” setting, meaning a pulse duration of 4 seconds and a “Break” of 2 seconds. With this special program, you combine the benefits of the Fitness and Metabolism programs. During the active phase, you train at 60 Hz for maximum strength, and during the passive phase (break phase), the endurance muscles are engaged at 7 Hz. This way, you alternate between challenging both types of muscle fibers in one program.

Pulse depth

“Pulse depth” lets you set how long the impulse lasts at the frequency you selected under “Frequency.” This value can only be configured for the “Individual” parameter. A single electrical impulse can last 50-400 µs.

The higher this value is set, the deeper the impulse penetrates into the muscle. For example, you can optimally target large muscles such as the thigh muscles, gluteal muscles, or back muscles with a pulse depth of 350 µs.

Pulse duration

Duration of the impulse in seconds, adjustable from 1-40 seconds (shown as a green number counting down during training).

Break

Length of the break during training, 0-40 seconds (shown as a red number counting down).

Training

For most training programs, we recommend a duration of around 20 minutes per session.

Frequency

The number of impulses per second. For example, in the “Fitness” training program, the muscles tense and relax 85 times per second.

Putting on and taking off

The eaglefit EMS Pants are available in sizes XS to XL. It is important to choose the right size so the electrodes fit snugly against the body. The EMS Pants are worn directly against bare skin, without underwear or other (sports) clothing. The electrodes do not need to be wetted; they should be placed directly over the muscles to be stimulated. Close contact with the skin ensures optimal transmission of the current to the muscle.

For the Pants’ electrodes to transmit the energy through your skin to your nerves and muscles, a very thin layer of moisture is needed. For some skin types, wearing the Suit for 2-3 minutes is enough; other skin types need to warm up for 5 minutes by doing jumping jacks, burpees, or sit-ups before the intensity of the impulses can be increased. If there is no moisture layer, you may feel an unpleasant, slight stinging sensation on the surface of your skin. In this case, reduce the impulse intensity for that muscle group and do a few more jumping jacks or squats before increasing the intensity. Heavy body hair or very dry skin can impair stimulation. In this case, you can lightly dampen the skin in the relevant areas with a cloth or use our Electrode Spray.

Ideally, turn the eaglefit EMS Pants inside out before putting them on. Step into the eaglefit EMS Pants and roll them up above your knees so that the electrodes are already positioned correctly on your body. After training, roll the eaglefit EMS Pants down from the top to take them off, turning them inside out again.

Always take care to avoid pulling hard on the EMS Pants when putting them on, while wearing them, or when taking them off, as this could damage the cable connections.

After training, roll the eaglefit EMS Pants inside out and take them off. Then wash the Pants according to the washing instructions or hang them on a clothes hanger to air out.

Training/exercises

As a general rule: If you feel unwell, stop training immediately and consult a doctor if necessary. Never train if you are not feeling well or are ill.

Training must also be stopped if there are problems with or malfunctions in the EMS system. Contact the manufacturer in the event of technical problems.

1. Warm-up

Before an EMS workout, as before any fitness workout, the muscles should be prepared for the upcoming exertion. Warming up has the following effects:

  • Conductivity between the electrodes and skin increases with light sweating
  • Increase in core body temperature
  • Improved energy supply processes in the muscle
  • Increased production of synovial fluid
  • Increased motivation and focus on the upcoming workout

For warming up, we recommend a short cardio session, such as a few jumping jacks, burpees, or 3-5 minutes on a stationary bike.

You can already set and activate low impulses at this point.

2. Training/exercises

In general, you can do any movement or workout indoors or outdoors with the eaglefit EMS Pants in dry weather. There are no limits to your imagination. Jogging, boxing, yoga, sling training, functional training, HIIT, or bodyweight training. However, the Pants should not get wet (e.g. in the rain).

An exercise poster showing bodyweight exercises for the whole body is included with the eaglefit EMS system for inspiration.

3. Stretching

After your workout, you should stretch for 2-3 minutes - possibly combined with the “Relaxation” program.

Stretching has the following effects:

  • Reduced muscle tone
  • Improved removal of metabolic waste products
  • Improved muscle recovery
  • Improved mobility

Washing and hygiene instructions

Before washing the eaglefit EMS Pants, please remove the box.

Proceed as follows:

1. Open the hook-and-loop fastener

1. Open the hook-and-loop fastener – EMS PANTS
1. Open the hook-and-loop fastener

2. Pull the box upwards

2. Pull the box upwards – EMS PANTS
2. Pull the box upwards

Clean the box only with a soft cloth.

We recommend hand-washing the eaglefit EMS Pants. Alternatively, you can wash the Pants in a laundry bag in the washing machine on a delicate/gentle cycle at 30 °C. Please remove the box before washing and be sure to fasten the hook-and-loop fastener beforehand.

We recommend using the Lavendelkraft detergent. Be sure never to use corrosive solvents/abrasive cleaners, sports detergents, disinfectants, water softeners such as Calgon, or detergents with additives such as chlorine or bleach. If the Pants are still too wet after washing, you can spin-dry them at a maximum of 900 rpm. To dry them, simply hang the EMS Pants on a clothes hanger and let them air-dry - ideally with the electrode pairs facing outwards. Never tumble-dry the eaglefit EMS Pants or expose them to direct UV radiation. This can damage the material.

The following washing symbols can be found on the eaglefit EMS Pants and should be observed:

3. Remove the Box – EMS PRO
2. Pull the box upwards

Disposal and recycling

The eaglefit EMS Pants and the box contain electrical components. Electronic devices are recyclable materials and do not belong in household waste. At the end of its service life, dispose of the product in accordance with the applicable legal regulations. By doing so, you fulfill your legal obligations and contribute to environmental protection.

There are collection points for recycling electrical and electronic equipment in all countries of the European Union. You can obtain information about these collection points from your local waste management authority or from the retailer where you purchased this product.

Information on safely removing batteries or accumulators:

If you want to dispose of the box, you can remove the battery by unscrewing the 4 Phillips screws on the back under the film and unplugging the battery.

  • Warning: Make sure the battery is completely discharged
  • Carefully remove the battery or accumulator
  • The battery or accumulator and the device can now be disposed of separately

Battery type: LiIo; 3.7 V, 3,000 mAh. Chemical system: lithium-ion battery

Disposal and recycling – EMS PRO
Disposal and recycling

Technical data

HOME / PRO EMS Box Value
Bluetooth version > 4.0
Power supply 5 V, USB C
Battery 3.7 V; 3,000 mAh LiPo

Warranty

You receive a 2-year warranty against material and workmanship defects. The warranty is valid in all countries where the eaglefit EMS system is officially sold. The warranty does not cover damage caused by improper or negligent handling.

If you feel that individual electrodes have stopped working, you can check this as follows:

  • Make sure the muscle group is activated in the app (the muscle name is highlighted in green)
  • Switch on the box, attach it to the Suit and turn the Suit inside out
  • Connect the box in the app and select the “Metabolism” program
  • Set the intensity of the impulses for the affected muscle group to 20
  • Moisten the electrodes of the affected muscle group with a damp cloth
  • Now place your left hand on the left chest electrode, for example, and your right hand on the right chest electrode

Since the current flows from one side to the other through our electrodes, it is important to place both hands on one of the electrodes for the affected muscle group each, in order to close the circuit.

If you now feel a tingling sensation in your hands, the electrode pair is intact.

EU Declaration of Conformity

EU Declaration of Conformity – EMS PRO
EU Declaration of Conformity

Manufacturer information

The eaglefit GmbH is authorized to affix the CE marking to the eaglefit EMS Pants, thereby demonstrating compliance with relevant EU directives.

More EMS devices from eaglefit

Contact

Cart