Manuals

Instructions EMS HOME

Congratulations on choosing your eaglefit HOME EMS System. This high-quality training device for electrical muscle stimulation was developed with extensive expertise so that you can perform highly efficient EMS fitness training at home and on the go with minimal effort.

About these instructions

EMS devices have been used in physiotherapy and competitive sports for many years. By observing the safety and warning information, you can use this device for targeted training at home, in your own four walls, or on the go, at a hotel, or in the office.

To get the greatest possible benefit and, above all, to rule out dangers and risks, be sure to read these instructions and follow the described rules of conduct.

We hope you enjoy using the eaglefit HOME EMS System.

Safety instructions

Intended use

The eaglefit HOME EMS System is a training system based on highly efficient electrical muscle stimulation (EMS) and designed for private use. By combining the HOME EMS Box with the eaglefit EMS System app, you can work out with EMS anytime at home, in the office, or on the go. This user manual will guide you step by step through training and operation, and provide valuable tips and information for your EMS training.

The eaglefit HOME EMS System is exclusively a training and fitness device, not a medical product.

Safety notice

People with heart problems or other cardiovascular diseases, electrical implants, metabolic disorders (e.g. type I or II diabetes, thyroid, liver or kidney disease), cancer, an abdominal wall or inguinal hernia, those who are pregnant, or those undergoing chemotherapy must NOT do this training! We recommend EMS training only for people aged 18 and over.

You can find our product safety data sheet here: to the safety data sheet

If you have any concerns about your health, seek medical advice before starting. This list is not a substitute for an individual medical assessment.

Improper use

Read the user manual and all information and instructions carefully to prevent personal injury and property damage and avoid dangerous situations. If you fail to follow the instructions and information on proper use, eaglefit GmbH accepts no liability for any resulting personal injury or property damage. In addition, the warranty will be void in such cases.

Please check your eaglefit HOME EMS System for damage before use and contact the manufacturer or your dealer immediately if you notice anything unusual.

Training with the eaglefit HOME EMS System may only be carried out in a dry environment. Avoid environments with very high humidity where your clients could come into contact with water (e.g. in the rain, near bathtubs, etc.).

Risks and contraindications

Although no cardiac arrhythmias have ever occurred during training with an eaglefit HOME EMS System, legislation requires that users be warned of the residual risk. If you have an existing cardiac arrhythmia, training with the eaglefit HOME EMS System is not recommended, as it may otherwise pose a risk to life.

Absolute contraindications

  • Acute illnesses, bacterial infections or inflammatory processes
  • Recent surgery (< 2 months)
  • Arteriosclerosis, arterial circulatory disorders
  • Stents or bypasses placed less than 6 months ago
  • Untreated high blood pressure
  • Diabetes mellitus
  • Pregnancy
  • Electrical implants, e.g. pacemakers
  • Tumors or cancer
  • Bleeding disorders, tendency to bleed (hemophilia)
  • Neurological disorders, epilepsy or multiple sclerosis
  • Abdominal wall or inguinal hernias
  • Cardiac arrhythmias

Relative contraindications

  • Acute back problems without a diagnosis
  • Acute neuralgia, herniated discs
  • Implants (prostheses)
  • Diseases of the internal organs (especially the kidneys)
  • Cardiovascular diseases
  • Motion sickness
  • Excess fluid accumulation in the body, edema
  • Open skin injuries, wounds, eczema, burns
  • Varicosis, varicose veins
  • Acute effects of alcohol, drugs or intoxicating substances
  • Taking vaccines

The eaglefit HOME EMS system must not be used if you have one absolute or several relative contraindications. Training despite existing contraindications can cause anything from minor injuries to death. We expressly warn that you must not train if any of the listed contraindications apply to you.

If in doubt, talk to your doctor before use to determine whether EMS training is suitable for you.

Electrical hazards

If you find any damage to one of the components, you must not use the eaglefit HOME EMS system. Handle it with great care to avoid damaging the material or cables. This means:

  • Never use the eaglefit HOME EMS system in a wet environment
  • Do not trap or kink the cables, and do not place heavy objects on them
  • Remove all piercings or similar items from the workout area before training

Any damage must be reported to the manufacturer, who will then decide how to proceed.

Training with the eaglefit HOME EMS system does not require any specific medical and/or physiological knowledge. However, you must read and understand the operating instructions carefully before your first workout with the eaglefit HOME EMS system. Failure to observe the instructions in this manual may lead to dangerous situations and, in extreme cases, death. The manufacturer accepts no liability for any resulting damage if these instructions are not followed.

Meaning and how it works

Training with electrical muscle stimulation (electromyostimulation), also known as EMS training, is based on the targeted stimulation of striated muscles by electrical impulses. This simulates natural muscle activation. This activation causes muscle fibers to contract without receiving a signal from the central nervous system (CNS). Normally, commands for a contraction come from the brain. During physical exertion, these electrical impulses are sent to the muscles via nerves. Because the impulses during EMS training are so similar to those from the CNS, the muscle cannot distinguish their origin, and a contraction occurs; that is, the command to contract the muscle comes via the electrodes built into the eaglefit HOME EMS Suit. During EMS training, rhythmic stimuli or impulses act on the muscles being trained, causing targeted tensing and relaxing. In physiotherapy, usually only individual muscles or muscle groups are trained using electrical stimuli, without performing additional movements or fitness exercises.

While no movements are performed during electrical muscle stimulation, full-body EMS training involves targeted exercises. This also trains your coordination, and the increase in strength can be put into targeted movement. In addition, full-body training strengthens the agonists, antagonists and stabilizing muscles, which are difficult to target and influence with conventional training. This helps prevent muscular imbalances, which can occur when training individual large muscle groups in a one-sided way.

Furthermore, simultaneous muscle stimulation can help prevent or correct protective postures, avoiding incorrect strain. The option to incorporate additional exercises during EMS training can improve intra- and intermuscular coordination as well as motor skills. Another positive effect of the additional exercises is that the tendons, ligaments and joints adapt to the increased muscle strength. Since muscle contractions do not require heavy weights, this form of full-body training is very easy on the joints.

Another benefit is the time saved compared to conventional forms of training:

  • Just 20-60 minutes of training per week is enough

Possible positive effects of EMS training

  • Reduced waist and abdominal circumference
  • Reduction in body fat
  • Increased endurance and performance
  • Back discomfort may be reduced
  • Improved endurance when putting strain on the back during everyday activities
  • 15-20 minutes of EMS training burns approximately 400-500 kcal when the exercises are performed at an appropriate intensity
  • Increase in maximum performance (movement speed + strength)

Potential specific effects of EMS training

EMS and movement

  • Unlike static muscle work, dynamic muscle work improves blood flow and lymph circulation.
  • Physical activity improves the tensile strength of tendons and the nourishment of joint cartilage.
  • Tendons, ligaments and joint cartilage are strengthened, while bone mineral content and bone size increase.
  • Eccentric strength training in particular affects connective tissue (tendons and ligaments).
  • Tendon and ligament injuries can be addressed more quickly through targeted activity.
  • These changes make the body more resilient and protect it from injury.

EMS and functional training

  • Training the whole body (muscles, tendons, ligaments)
  • The focus is on learning and performing the movement.
  • Based on stabilizing the body, especially the core muscles
  • Can be supplemented with various training equipment (e.g. Sling trainer, balance pad, kettlebell, exercise ball)

EMS and sling training

  • Exercises for the whole body and isolation exercises for individual muscles
  • Training intensity can be easily varied by changing the angle to the Sling trainer anchor point.
  • Training the stabilizer muscles with unstable grip ropes, further intensified by a pulley
  • Wide variety of exercises thanks to the pulley
  • Requires little space
  • Easy to set up and take down

EMS and outdoor training

  • The focus is on training and movement outdoors.
  • Exercises for the whole body
  • Exercise intensity is varied through your own body weight, terrain or everyday objects.
  • Additional psychological benefits from training outdoors
  • Motivation through variety

Full-body EMS training offers the opportunity to train with high effectiveness and time efficiency. It is therefore an excellent way to increase strength, build muscle and reduce body fat. It can generate stimulus intensities that are higher than those achieved with conventional training methods.

For these reasons, several important conditions must be observed during training.

Training preparation

  • Full-body EMS training should only be performed when you are in an appropriate physical condition.
  • Be sure to replenish your carbohydrate stores before training, as the very large muscle mass being worked results in a high metabolic load.
  • You should also make sure to increase your fluid intake before, during and after training.

Training progression

  • During your first training sessions, you should never overexert yourself. The training should be performed with a reduced duration (approx. 12-15 min.) and at an appropriate intensity. The training duration should then be gradually increased to 20 min.
  • During the first 8-10 weeks, allow at least 4 days between workouts. This is the only way to ensure recovery and positive adaptation.

Quick start guide

Quick start guide for your new eaglefit HOME EMS System

  1. Charge the HOME Box until the LED lights up green
  2. eaglefit EMS System app download from the App Store
  3. Put on the Suit – if your skin is extremely dry or you have heavy body hair, dampen the electrodes slightly or use electrode spray
  4. Switch on the HOME Box (press lightly with your index finger for 2 seconds into the small indentation between the logo and the LED), attach it to the Suit, and launch the app
  5. Assign a new profile name for the next workout
  6. Establish a Bluetooth connection to the HOME Box (click “Bluetooth” at the top right, then “Scan,” then “Connect”)
  7. Under “Parameters,” adjust the settings for the profile, warm up sufficiently, then press “Start”
  8. Increase the intensity of the muscles one by one (press the up arrow until the setting is strong enough, then click the number above the muscle so it is outlined in gray)
  9. Start your workout, then end it after 20 minutes
  10. Save settings by exiting the app using the arrow at the top left
  11. Make sure to drink enough water before, during, and after your workout, at least 1/2 liter more than usual
  12. Take a break of at least 48 hours (during the first 10 weeks, max. 1 workout per week)

Feel free to watch our detailed onboarding video as well: EMS onboarding

Usage tips

How to switch the HOME Box on/off correctly:

  • To switch it on, press for 2 seconds lightly with your index finger into the indentation between the logo and the LED
  • To switch it off, press for 6 seconds lightly with your index finger into the indentation between the logo and the LED

We deliberately set the HOME Box shutdown time to 6 seconds so you don’t accidentally touch the box during your workout and switch it off unintentionally.

Usage tips – EMS HOME
Usage tips

First use of the HOME Box and the app

Charging the HOME Box

Before you can start training, download and install the eaglefit EMS System app from your app store by searching for “eaglefit” or “eaglefit EMS System”.

Before using the HOME EMS Box for the first time, charge its battery for at least 3 hours. Our batteries have overcharge protection, so you cannot “overcharge” them. To charge it, use the supplied USB cable and 220 V power adapter. While charging, the indicator on the HOME EMS Box lights up blue. When the battery is fully charged, the indicator lights up green.

Download the eaglefit EMS System app from your app store:

First launch

When you launch the app, you can first choose between EMS BELT, HOME EMS, PRO EMS, and CONNECT EMS. If you are using the app for the first time, create a profile for your training. Later, you can save all your settings under “Select profile.”

Charging the PRO Box – EMS PRO
Charging the HOME Box
Charging the HOME Box – EMS HOME
Charging the HOME Box

If you have already created profiles, they will be displayed. Select a saved profile or add a new one to save your settings (intensity for each muscle, etc.) as you continue.

The app is designed to always save the most recently set values for a training program in the profile. Therefore, the app will overwrite your settings as soon as you switch training programs within a profile.

We recommend creating a separate profile for each training program so you can always set and access the correct values for each program.

Once you have selected a profile, tap “Confirm” to go to the training interface with the preset values of the profile highlighted in green. Your changes will be saved there when you later leave this page using the “Back arrow” (in the top-right corner).

First, connect to the HOME EMS Box via Bluetooth. Switch on the charged HOME EMS Box (place a finger on the indentation for about 2 seconds) and find it in the eaglefit app by tapping “Bluetooth” at the top right next to the battery indicator, then tapping “Search” in the next window. Select your HOME EMS Box (e.g., “eagle_home0000”) by tapping “Connect” at the end of the row. You will then return to the training interface.

In the training interface, you can adjust the intensity of each pair of electrodes, switch individual electrodes on/off, and open the parameter menu using the green menu icon (three lines at the bottom left).

App guide

The app is designed to let you create as many profiles as you like on each device. Each profile stores all the settings and parameters for one pulse type (Fitness/Metabolism/Relaxation/Custom/Fat Burning/HIIT/Mobility/Explosive Strength). Assign a suitable name to each profile.

The name could be “Thomas_Fitness” or “Muscle Building,” for example. In accordance with the GDPR, your data is stored only on your device. Therefore, you need to create separate profiles on your iPhone and iPad, for example. The app saves the most recently used settings for the profile you are logged into as soon as you leave the training screen by tapping "Back arrow".

Establishing a Bluetooth connection

Communication between the app and your HOME EMS Box will be established once a Bluetooth connection has been made.

To establish the Bluetooth connection, tap “bluetooth” in the top right the first time you use it.

On the next screen, select “Search”.

You will see a list of available Bluetooth devices nearby.

Please select “eagle_home000” to connect to the HOME EMS Box.

Establishing a Bluetooth connection – EMS HOME
Establishing a Bluetooth connection
Establishing a Bluetooth connection – EMS HOME
Establishing a Bluetooth connection

Requirements for a Bluetooth connection

  • The HOME Box must be charged and switched on. You can tell by the bright green/blue LED
  • Switch on the HOME EMS Box by pressing the button (a slight recess in the center) for 2 seconds. The LED will turn on and glow blue
  • To switch it off, press the button for about 6 seconds
  • You must grant the app access to your location so the Bluetooth signal can be processed correctly
  • You will NOT find the HOME EMS Box in your usual phone Bluetooth settings because we use Bluetooth Low Energy (BLE)

Navigation and EMS pulse settings

Navigation and EMS pulse settings – EMS HOME
Navigation and EMS pulse settings
  1. Program selection
  2. Reset - sets all intensities to "ZERO"
  3. Select/deselect all intensities for each muscle group
  4. Increase all activated intensities for each muscle group
  5. Decrease all activated intensities for each muscle group
  6. Start/Pause - Start or pause your training
  7. Activate/deactivate muscle groups by tapping the muscle name
  8. Bluetooth menu - tap here to connect the HOME EMS Box
  9. Active training time
  10. The green dots show which electrodes are actually activated

Settings under “Parameters”

The parameters already have preset starting values. Click + or – to adjust the parameters highlighted in black.

The following programs (“modes”) are already pre-installed in the eaglefit EMS System App:

Fitness

Please select the “4/2” setting, meaning a pulse duration of 4 seconds and a 2-second pause. Ideally, tense your muscles for 4 seconds during training, then relax them for 2 seconds.

The fitness program is ideal for building large-volume white skeletal muscle. It increases your maximum strength and promotes muscle growth. Your white skeletal muscles are best trained with 6-8 repetitions per muscle group at approximately 80% of your maximum strength. The pulses are applied to each muscle group at a frequency of 85 Hz, without putting strain on the joints, ligaments, or tendons with heavy training weights. The pulse depth in this program is 350 µs.

Fitness training should be combined with exercises and can be complemented, for example, with sling training or HIIT.

Recommended training:

  • Strength/weight training
  • Few repetitions (6-8)
  • 1 set per muscle group

Metabolism/cardiovascular

Please select a pause time of 0 seconds for a continuous pulse. The pulse duration setting does not matter.

The metabolic program, which trains the red endurance muscles, can be used specifically for muscle toning. It is our classic endurance/athletic training program. Activating slow-twitch muscle tissue burns fat and increases muscle definition. The training frequency is 7 Hz with a pulse depth of 350 µs.

This program is ideal for warming up and improving circulation and metabolism. Ideally, metabolic training should be combined with endurance exercises such as:

  • Nordic walking
  • Jogging
  • Cycling
  • Exercises on cardio machines
  • Yoga
  • Static exercises (do not set the intensity too high)

Relaxation

Please select the “1/1” setting, with a pulse duration and a pause of 1 second each.

This program produces gentle muscle twitches and promotes muscle recovery, faster regeneration and is also used for functional rehabilitation after illness. At a training frequency of 100 Hz and a pulse depth of 150 µs, it relieves tension and supplies the muscles with nutrients.

You can use the relaxation program for 5-10 minutes after an intense workout (with or without EMS), or for 10-30 minutes at a moderate intensity after a strenuous day, for example, simply while relaxing on the sofa.

Choose a low intensity here - the pulse should provide a pleasant, massaging sensation.

Individual

Choose the settings according to your preferences or therapeutic recommendations.

Advanced users can freely adjust all parameters in this program (pulse frequency, pulse depth, pulse duration, pause, and training duration). A frequency of 1-120 Hz and a pulse depth of 50 – 400 µs are possible.

Deep Core for deep spinal muscles

This training program is specifically designed to gently but effectively strengthen the deep muscles close to the spine. The aim is to activate the deep stabilizing muscles in the back to relieve pressure on the intervertebral discs and support the spine over the long term.

How it works:

The program generates an even alternation between muscle tension and relaxation. The moderate impulses at 27 Hz primarily improve muscular endurance and stability. The comparatively long pulse duration ensures an intensive yet gentle workout, while the short pauses support even circulation and recovery.

Areas of application:

  • Support for back pain associated with disc problems
  • Strengthening the deep core muscles
  • Prevention of poor posture and muscular imbalances
  • Suitable for beginners and people in rehabilitation

Video training

In this program, you can watch an avatar demonstrate training exercises and put together a short training plan from the preset exercises. What makes it special is that you can choose a different frequency and pulse depth for each workout. Simply hold your finger over the desired exercise for 2-3 seconds until the preview image lifts up, then drag it to the row below and arrange it. You can remove exercises from the row in the same way.

Fat burning

Please select the “4 / 2” setting: a pulse duration of 4 seconds and a “pause” of 2 seconds. This special program combines the benefits of the fitness and metabolism programs. During the active phase, you train at 60 Hz for maximum strength, while during the passive phase (pause phase), your endurance muscles are engaged at 7 Hz. This way, you challenge both muscle fiber types alternately in one program.

Explosive strength

Use this program to build muscle. Its special feature is that 100% of the set impulse intensity is delivered from the very first second (ramp=0). This setting is particularly effective for athletes with explosive movements (such as golf), ball sports, or reactive sports.

Mobility

The app setting in the eaglefit HOME EMS app for mobility training is based on a special EMS program specifically designed to support muscle lengthening and mobility training (mobility). The training is designed for gentle muscle stimulation to improve stretching ability, range of motion, and neuromuscular coordination without overstraining the muscles.

Characteristics of the app setting for mobility training:

  • High frequency (120 Hz): This supports gentle muscle activation without strong contractions and is ideal for sustained movements and stretching exercises.
  • Long pulse duration (350 µs): This reaches deep into the muscles, which is particularly beneficial for muscle lengthening and mobility exercises.
  • Gentle pulse intensity: The intensity can be adjusted individually and is set to produce a noticeable but comfortable muscle contraction, making it ideal for supporting mobilization without pain or fatigue.
  • Dynamic pulse sequences (anterior and posterior chains): You can activate either the anterior or posterior chain with just one click. This automatically helps you feel and activate the right muscles.
  • Interval duration: With the preset, you activate the selected muscle chain for 30 seconds at a time and can move into the other position during the 15-second break.

Purpose of the setting:

EMS support during mobility exercises helps loosen tense muscles, improve mobility and, through additional neuromuscular activation, increase the effectiveness of your workout, especially when combined with targeted stretching and mobilization exercises.

Pulse depth

“Pulse depth” lets you set how long the impulse you configured under “Frequency” lasts. This value can only be configured in the “Individual” parameter. A single electrical impulse can last 50-400 µs.

The higher this value is set, the deeper the impulse reaches into the muscle. For example, you can effectively target large muscles such as the thigh muscles, gluteal muscles or back muscles with a pulse depth of 350 µs.

Pulse duration

Duration of the impulse in seconds, adjustable from 1-40 seconds (indicated by a green number counting down during training).

Break

The length of the break during training, 0-40 seconds (indicated by a red number counting down).

Training

For most training programs, we recommend a duration of approx. 20 minutes per session.

Frequency

The number of impulses per second. For example, the “Fitness” training program contracts and relaxes the muscles 85 times per second.

Putting on & taking off

The eaglefit HOME EMS Suit is available in sizes XXS to 4XL. It is important to choose a snug fit so that the electrodes sit close to the body. The suit can be used as both a dry suit and a wet suit. When used as a dry suit, wear it directly against bare skin, without underwear or other (sports) clothing. The electrodes do not need to be wet; they should be placed directly over the muscles to be stimulated. Close contact with the skin ensures optimal transmission of the current to the muscle.

For the electrodes in the dry suit to transmit energy through your skin to your nerves and muscles, a very thin film of moisture is needed. For some skin types, simply wearing the suit for 2-3 minutes is enough; other skin types need to warm up for 5 minutes with jumping jacks, burpees or sit-ups before the impulse intensity can be increased. If the moisture film is missing, you may feel an unpleasant, slight stinging sensation on the surface of your skin. If this happens, reduce the impulse intensity for that muscle group and do a few more jumping jacks or squats before increasing the intensity. Heavy body hair or very dry skin can impair stimulation. In this case, you can lightly dampen the skin in the affected areas with a cloth or use our Electrode Spray.

The eaglefit HOME EMS Suit is fastened with the zipper at the back. Simply use the attached cord to close the zipper, while pulling against it with your other hand at the bottom of the zipper. This tightens the zipper so you can easily pull it up using the cord. At the bottom, there is a small, square fabric patch attached to the Suit with a hook-and-loop fastener. You can remove it, lay the zipper cord over the hook-and-loop fastener, and reattach the fabric patch. This keeps the cord from dangling during your workout. If the Suit does not fit snugly in some areas, you can purchase hook-and-loop straps for your arms and legs in our shop or use the included waist belt for your lower back to press the Suit against your skin in those areas as well. Alternatively, you can wear close-fitting clothing over the eaglefit HOME EMS Suit to achieve the same effect.

After your workout, open the zipper and roll the eaglefit HOME EMS Suit down inside out to take it off. Then wash the Suit according to the washing instructions or hang it up on a clothes hanger.

The workout/exercises

As a general rule: If you feel unwell, stop training immediately and consult a doctor if necessary. Never train if you are feeling unwell or sick.

Training must also be stopped in the event of problems or malfunctions with the eaglefit HOME EMS system. In case of technical issues, contact the manufacturer.

1. Warm-up

Before an EMS workout, as before any fitness training, the muscles should be prepared for the upcoming exertion. Warming up has the following effects:

  • Conductivity between the electrodes and skin increases with light sweating
  • Increase in core body temperature
  • Improved energy supply processes in the muscles
  • Increased production of synovial fluid
  • Increased motivation and concentration on the upcoming workout

To warm up, we recommend a short cardio session, for example, a few jumping jacks, burpees, or 3-5 minutes on a stationary bike.

You can already set and activate low-intensity impulses here.

2. Training/Exercises

In general, with the eaglefit HOME EMS Suit, you can perform any movements and workouts indoors or outdoors in dry weather. Your imagination is the only limit. Jogging, boxing, yoga, training with a Sling trainer, functional training, HIIT, or training using your own body weight. The Suit should only be kept away from moisture (e.g. rain).

The eaglefit HOME EMS Suit comes with an exercise poster for inspiration, showing exercises for the entire body using your own body weight.

3. Stretching

After your workout, you should stretch for 2-3 minutes - possibly in combination with the “Relaxation” program.

Stretching has the following effects:

  • Reduced muscle tone
  • Improved removal of metabolic waste products
  • Improved muscle recovery
  • Improved mobility

Washing and Hygiene Instructions

Before washing the eaglefit HOME EMS Suit, please remove the HOME EMS Box.

Proceed as follows:

1. Open the hook-and-loop fastener

1. Open the hook-and-loop fastener – EMS HOME
1. Open the hook-and-loop fastener

2. Pull the Box upward

2. Pull the Box upward – EMS HOME
2. Pull the Box upward

3. Remove the Box

3. Remove the Box – EMS HOME
3. Remove the Box

Clean the HOME EMS Box only with a soft cloth.

We recommend hand-washing the eaglefit HOME EMS Suit. Alternatively, you can wash the Suit in a laundry bag in the washing machine on a delicate/gentle cycle at 30 °C. Before washing, please remove the Box and be sure to close the zipper and all hook-and-loop fasteners.

We recommend using the Lavendelkraft detergent. Be sure never to use caustic solvents or abrasive cleaners, sports detergents, disinfectants, water softeners such as Calgon, or detergents with additives such as chlorine or bleach. If the Suit is still too wet after washing, you can spin it at a maximum of 900 rpm using the spin cycle. To dry the Suit, simply hang it on a clothes hanger and let it air-dry - preferably with the electrode pairs facing outward. Never tumble-dry the eaglefit HOME EMS Suit or expose it to direct UV radiation. This may damage the material.

The following care symbols can be found on the eaglefit HOME EMS Suit and should be observed:

3. Remove the Box – EMS PRO
3. Remove the Box

Disposal and Recycling

The eaglefit HOME EMS suit and the HOME EMS box contain electrical components. Electronic devices are recyclable materials and do not belong in household waste. At the end of its service life, dispose of the product in accordance with the applicable legal regulations. In doing so, you fulfil your legal obligations and help protect the environment.

There are collection points for recycling electrical and electronic equipment in all countries of the European Union. You can obtain information about these collection points from your local waste disposal authority or from the retailer where you purchased this product.

Information on the safe removal of batteries or rechargeable batteries:

If you want to dispose of the HOME EMS Box, you can remove the battery by undoing the 4 Phillips screws on the back under the film and unplugging the battery.

  • Warning: Make sure the battery is completely discharged
  • Carefully remove the battery or rechargeable battery
  • The battery or rechargeable battery and the device can now be disposed of separately

Battery type: LiIo; 3.7 V, 3,000 mAh. Chemical system: lithium-ion battery

Disposal and recycling – EMS PRO
Disposal and Recycling

Technical specifications

HOME EMS Box Value
Bluetooth version > 4.0
Power supply 5 V, USB C
Battery 3.7 V; 3,000 mAh LiPo

Warranty

You receive a 2-year warranty against defects in materials and workmanship. The warranty is valid in all countries where the eaglefit® HOME EMS System is officially sold. The warranty does not cover damage caused by improper or negligent handling.

If you think individual electrodes have stopped working, you can check them as follows:

  • Make sure the muscle group is activated in the app (the muscle name is highlighted in green)
  • Switch on the HOME EMS Box, attach it to the Suit and turn it inside out
  • Connect the HOME EMS Box in the app and select the “Metabolism” program
  • Set the impulse intensity for the affected muscle group to 20
  • Dampen the electrodes of the affected muscle group with a wet cloth
  • Now place your left hand on the left chest electrode, for example, and your right hand on the right chest electrode

Since the current flows through our electrodes from one side to the other, it is important to place each hand on one of the electrodes of the affected muscle group to close the circuit.

If you feel a tingling sensation in your hands now, the electrode pair is working properly.

EU Declaration of Conformity

EU Declaration of Conformity – EMS PRO
EU Declaration of Conformity

Manufacturer information

Der eaglefit GmbH is authorized to affix the CE marking to the eaglefit HOME EMS System and thereby demonstrate compliance with relevant EU directives.

More EMS devices from eaglefit

Contact

Cart