Manuals
Instructions Pull-up bar
Congratulations on choosing the eaglefit pull-up bar. This high-quality training device was developed with great expertise and skill so that you can perform highly efficient functional fitness training at home and on the go with minimal effort.
About these instructions
To get the most out of it and, above all, to avoid hazards and risks, you should read these instructions carefully and follow the rules of conduct described.
We hope you enjoy using the eaglefit pull-up bar.
Safety instructions
Here you can find our safety data sheet for the product: view the safety data sheet
Pull-Up Bar Wood/Ash
1. Version: with rope loops

Attach the 2 rope loops (see image above) of the pull-up bar to a carabiner. The pull-up bar can support up to 100 kg. You can attach the carabiner directly to a ceiling mount.
2. Version with attachment strap

You can adjust the length using the central length adjuster (see image above) on the attachment strap and/or by positioning the carabiner in the stitched section.
Training tips
For beginners, it is recommended to start with rowing movements, performing them in different variations (underhand grip, overhand grip, narrow and wide). For this, adjust the length of the pull-up bar to elbow height using the adjustable-length version.
Instructions for use
Before starting your workout, make sure the pull-up bar is hanging horizontally. Center the knot if necessary. Before starting your workout, check the stability of the entire setup visually and with a gentle pull.
If you need to reattach the Prusik knot to the pull-up bar, this video will help you from 00:35 seconds onward.
Use a triple Prusik knot for the pull-up bar.
Exercises
You target different muscles by varying your grip (overhand or underhand) and grip width (hands close together, shoulder-width apart, or wide).
With adjustable-length strap
Inverted rows to prepare for free pull-ups:
- Stand shoulder-width apart directly in front of the pull-up bar
- Shoulders pulled back and down
- Core engaged
- Look straight ahead
- grip the pull-up bar shoulder-width apart with an underhand grip
- your arms are bent
- slowly lean back at an angle
- extend your arms
- keep your entire body straight with your core stable
- slowly pull your chest up to the pull-up bar
3 x 12 repetitions with 30 seconds of rest between each set. The longer the fastening strap, the harder the exercise.
Free pull-ups
To prevent injuries, please make sure you perform the exercise correctly:
- Stand under the pull-up bar
- grip the bar with equal distance from the center, using an underhand or overhand grip
- pull yourself up with your chest until your chin is above the pull-up bar
- keep your arms slightly engaged as you lower yourself
Pay attention to your body balance and always keep your core stable and engaged. To help you with your first pull-ups, we recommend the eaglefit natural latex fitness band.
TIP: Pull-ups are easiest with a close underhand grip. Crossing your legs gives you more strength. Avoid swinging. We recommend initially alternating between free pull-ups and rows in your training.
Care instructions
Wipe the wood with a soft, dry cloth. Straps and ropes can be cleaned with a slightly damp cloth and mild detergent. Do not use harsh cleaners or abrasive products, or sharp or pointed objects. Sunlight may change the color of the wood. However, this does not affect its function. The eaglefit pull-up bar must not be stored permanently in damp rooms, as this could cause it to warp.
Expansion options
eaglefit resistance band made of natural latex - a training aid for pull-up exercises, available in 2 strengths.

eaglefit ceiling mount made of stainless steel with fischer screws and anchors.

Materials
Pull-up bars made using energy- and resource-saving production
The wood for your eaglefit pull-up bar comes from the Danube Forest or the valleys of the Swabian Alb. There is plenty of water and nutrients there for the ash trees to grow strong and healthy, which is essential for the wood’s excellent structural properties.
After the ash trees are felled in winter, they are cut into planks in our neighboring town, then stacked and covered to dry.
Natural drying fully preserves the wood’s structural properties. It also uses no energy for drying. With this type of drying, prolonged storage of the wood in sunlight, wind, and weather can cause slight color changes on the surface. During further processing into eaglefit pull-up bars, not all of this may be removed, leaving a dark edge. This is not a defect, but a sign of responsible use of resources and energy.
Your new eaglefit pull-up bar will darken over the first few weeks due to UV radiation, as the light-colored wood, which was protected until now, is now exposed to the sun.
We’re pleased to put a great training tool in your hands with a clear conscience, made using an energy- and resource-saving production process and crafted with lots of care just for you!